What if India had no roads tomorrow? A rider's maths

Delete 63 lakh km of road overnight and the bike still moves. The physics says how fast, how far, and which bike wins.

A bullock cart and its driver on a rural track near Mysuru in Karnataka
Photo: Adam Jones Adam63, CC BY-SA 3.0, via Wikimedia Commons

If India had no roads tomorrow, about 63 lakh km of surface that carries two-thirds of the country's freight and three-quarters of its passenger travel would vanish, and the railways could not absorb even a fraction of it. A motorcycle would still move: on firm dirt it needs about four times the rolling push of tarmac, on loose sand twenty times, so a loaded tourer drops to 25–40 km/h and a Bengaluru to Kolkata ride stretches from two days to about a week. The bikes that win are light, simple and geared low, not powerful.

Key takeaways
  • About 63 lakh km of road in India in 2021–22, and 71% of it rural roads (PRS analysis of MoRTH data).
  • 66% of freight tonne-km and 78% of passenger-km moved by road in 2025 (NITI Aayog).
  • 0.015 to 0.3: rolling resistance rises twentyfold from good tarmac to loose sand.
  • About 10 km/l is what a 26.5 km/l highway bike would drop to on sand, by the force ratio.

    Calculated in this post from a 26.5 km/l highway mileage (Sapta's own Mulbagal ride on the KTM) and the 318 N and 820 N forces worked out below, which use the Engineering ToolBox rolling-resistance coefficients, with these example inputs (270 kg, 100 km/h on tarmac, 30 km/h on sand).

  • Mass beats power off-road: every extra 10 kg adds rolling drag in direct proportion.

This is a tier-2 what-if, so I solve it the way an engineer would: size what disappears, then put a loaded motorcycle on each surface that's left and work out force, power, speed and fuel. The road and freight numbers come from MoRTH and NITI Aayog; the surface physics from standard rolling-resistance coefficients.

How much road would India lose?

India had about 63 lakh km of road in 2021–22, growing about 3.7% a year since 2015, according to PRS Legislative Research's analysis of MoRTH data. As of March 2019, 71% of it was rural roads, 10% district roads, 9% urban roads, 3% state highways and 2% national highways.

  • National highways: 1,46,560 km in 2025, up from 91,287 km in 2014 (MoRTH year-end review).
  • Four lanes or wider: 43,512 km of those highways.
  • Access-controlled expressways: 3,052 km, up from 93 km in 2014.
  • Building pace: 10,660 km of national highway in 2024–25, about 29 km a day.

At 2024–25's pace of 10,660 km a year, rebuilding only the national highways would take about 14 years; the whole network at that pace, about 590 years. That is the scale of what "no roads" means.

The story

In 1959, Falguni Devi, the wife of Dashrath Manjhi, a labourer from Gehlaur in Bihar's Gaya district, was badly injured in a fall and died. The nearest town with a doctor was about 70 km away.

In 1960 Manjhi began cutting through the rocky ridge beside his village with a hammer and a chisel. He kept at it for 22 years. By 1982 he had opened a passage about 110 m long and 9.1 m wide, up to 7.7 m deep in places, and the journey from Atri to Wazirganj fell from 55 km to 15 km. Official roads over his path were built only after his death in 2007. For Gehlaur, having no road had meant a 55 km detour around one hill.

Wikipedia: Dashrath Manjhi
The Teesta river flowing through a forested valley near Rangpo in Sikkim
The Teesta near Rangpo. In October 2023 this valley lost its bridges in hours; Sapta rode the same Teesta corridor in November 2025.Photo: Pinakpani, CC BY 4.0, via Wikimedia Commons

What would stop moving first?

Freight and people, in that order. NITI Aayog's February 2026 transport report puts India's 2025 freight task at 4,661 billion tonne-km, with 66% by road, 22% by rail and 8% by waterways. Passenger travel was 6,410 billion passenger-km, 78% of it by road.

Who moves India's freight (2025, share of tonne-km)
See the data as a table
Share (%)
Road66
Rail22
Waterways8
Pipelines and air4

Source: NITI Aayog, Scenarios Towards Viksit Bharat and Net Zero: Transport (Feb 2026), as reported by ThePrint · The last slice is the remainder after road, rail and waterways.

Could rail take over? To carry road's share as well as its own, rail would have to move four times its current freight load overnight, and every rail wagon still needs a truck at each end. Without roads, the first and last kilometre is gone for every station in the country.

Scenarios Towards Viksit Bharat and Net Zero: Sectoral Insights, TransportNITI Aayog · Government of India report · February 2026 (figures as reported by ThePrint)

The report models India's transport demand and emissions to 2070. For 2025 it puts freight at 4,661 billion tonne-km (road 66%, rail 22%, waterways 8%) and passenger travel at 6,410 billion passenger-km (road 78%, rail 17%, air 4%, metro 1%). Under current policies, it projects rail's freight share reaching only about 25% by 2070. The limit: I read these numbers in ThePrint's report on the release, not in the full PDF, and modal shares depend on how short trips are counted.

Read the report summary (free)

How fast can a touring bike go with no tarmac?

Slower, but not as slow as you'd think on firm ground. The deciding term is rolling resistance: the force a tyre loses by squashing itself and the ground, written as a coefficient \( C_{rr} \) times the weight.

The model

Total resistance at steady speed on level ground is rolling drag plus air drag:

\[ F = C_{rr}\, m g + \tfrac{1}{2}\rho\, C_d A\, v^2 \]

Power needed is \( P = F v \). This is the same road load equation used to test cars on dynamometers.

  • Mass \( m = 270 \) kg: a mid-size adventure bike, rider and luggage (my assumption).
  • Air density \( \rho = 1.2 \) kg/m³ at sea level.
  • Drag area \( C_d A = 0.6 \) m² for an upright bike and rider (my estimate; real values range 0.5 to 0.8).
  • \( C_{rr} \) from the Engineering ToolBox table for car tyres: 0.01–0.015 on good concrete or asphalt, 0.02 on rolled gravel, 0.04–0.08 on medium-hard soil or loose gravel, 0.2–0.4 on loose sand.
Surface\( C_{rr} \)SpeedRolling dragTotal forcePower
Highway tarmac0.015100 km/h40 N318 N8.8 kW
Rolled gravel road0.0350 km/h79 N149 N2.1 kW
Firm dirt track0.0640 km/h159 N203 N2.3 kW
Loose sand0.3030 km/h795 N820 N6.8 kW

The worked case: firm dirt at 40 km/h

  1. Rolling drag.
    \[ F_r = 0.06 \times 270 \times 9.81 = 159\ \text{N} \]
  2. Air drag at 11.1 m/s.
    \[ F_a = 0.5 \times 1.2 \times 0.6 \times 11.1^2 = 44\ \text{N} \]

    Calculated in this post from the 40 km/h premise (11.1 m/s), an air density of 1.2 kg/m³ (Engineering ToolBox gives 1.204 kg/m³ at 20 °C) and a drag area of 0.6 m² (my own estimate), with these example inputs.

  3. Power.
    \[ P = (159 + 44) \times 11.1 = 2.3\ \text{kW} \]
    A 390-class single makes ten times that. Power is not the problem off-road.
  4. Fuel by force ratio. Fuel per km scales roughly with force, so against 318 N at highway speed: \( 26.5 \times 318/203 \approx 41 \) km/l in theory. Real engines lose efficiency at light load and in low gears, so expect far less than this; the point is that firm dirt at 40 km/h is not a fuel disaster.
Force to keep 270 kg movingTarmac 100 km/h318 NGravel 50 km/h149 NDirt 40 km/h203 NSand 30 km/h820 NOn sand the tyre, not the air, eats almost all the force.
On firm ground the bike slows mainly because the surface is rough, not because the engine can't push. Sand is different. Numbers from the working above.

Why is sand the real wall?

Because on sand the tyre can't push back hard enough. The rear tyre can only deliver a forward force up to its traction coefficient \( \mu_t \) times the load on it; if the rolling drag is bigger, the wheel digs.

  1. Load on the rear. Assume 60% of 270 kg on the rear wheel: \( N_r = 0.6 \times 270 \times 9.81 = 1{,}589 \) N.
  2. Condition to move.
    \[ \mu_t N_r \ge C_{rr}\, m g \;\Rightarrow\; \mu_t \ge \frac{C_{rr}}{0.6} \]
  3. On loose sand. With \( C_{rr} = 0.3 \), you need \( \mu_t \ge 0.5 \). Dry loose sand is often below that for a road tyre (my estimate, not a measured value), which is why heavy bikes bog down and riders drop tyre pressure to lengthen the contact patch.

Notice that mass cancels in the condition, but not in the force: a heavier bike needs the same grip ratio and far more push, so it digs faster and is harder to lift out.

Watermelon fields planted on the sandy bed of a dry river in Andhra Pradesh
A dry riverbed in Andhra Pradesh, farmed in the dry season. In a no-roads India, riverbeds would become the flattest highways, and the most dangerous in the monsoon.Photo: PJeganathan, CC BY-SA 4.0, via Wikimedia Commons

How long would Bengaluru to Kolkata take?

About a week instead of two days. Sapta's own November 2025 ride took about 38 hours 57 minutes door to door for about 2,000 km on NH16, with 26 hours 42 minutes of riding.

  1. Mixed dirt pace. Assume an average 35 km/h on tracks and field edges.
  2. Riding hours. \( 2{,}000 / 35 = 57 \) h, before any detours.
  3. Detours. No bridges means fording or ferries at the Krishna, Godavari, Mahanadi and other big rivers; assume 30% extra distance: \( 57 \times 1.3 = 74 \) h.
  4. Days at 8 h a day. About 9 days. On firmer tracks at 45 km/h it falls to about 7.

    Calculated in this post from the about 2,000 km of my own ride and these example inputs (35 or 45 km/h, 30% extra distance, 8 hours a day): 74 / 8 = 9.3 days, and 2,000 x 1.3 / 45 / 8 = 7.2 days.

Which bikes would win in a no-roads India?

Light ones. Because rolling drag is \( C_{rr} m g \), every kilogram costs you directly, and on sand it costs more than air drag ever does.

Bike typeWhy it helpsWhy it hurts
125–200 cc commuterLow mass, easy to lift, simple to fixLow ground clearance, weak suspension
Dual-sport 250–450 ccLong travel, tall clearance, spoked wheelsSmall tanks, thin seats
Heavy adventure bike, 200+ kgRange and comfort on gravel roadsBogs in sand, hard to pick up alone
Bullock cartWide wheels, zero fuel, works in mudAbout walking pace

The calculator lets you test your own bike and load on each surface.

Off-road force, power and fuel for your bike

A Royal Enfield Himalayan adventure motorcycle parked, side view
A Royal Enfield Himalayan, the kind of long-travel, upright single that would suit a roadless India better than any superbike.Photo: Ashley Pomeroy, CC0, via Wikimedia Commons

What happens to villages and the economy?

The best evidence comes from the opposite experiment: India building roads where there were none. Under PMGSY, India's rural roads programme, the government has connected hundreds of thousands of villages with all-weather roads.

Rural Roads and Local Economic DevelopmentSam Asher and Paul Novosad · American Economic Review 110(3): 797–823 · 2020

The authors study PMGSY, a programme worth about 40 billion US dollars, using a fuzzy regression discontinuity: villages just above a population cut-off were more likely to get a road than similar villages just below it. With household and firm census data, they find that four years after a new road, the main change is that workers move out of farming into other jobs. Farm output, household income and assets show no major change, and village firm employment rises only slightly. The limit: four years is short, and the result is about remote villages gaining a road, not a whole country losing all of them.

Read the abstract (free)

Run that backwards and the first loss in a roadless India would be access to outside jobs and markets, not the farm itself. Villages would revert to local economies within a day's walk or ride.

A roadless India, step by stepDay 1Trucks stop: 66% of freight haltsWeek 1Fuel pumps run dry; bikes still moveMonth 1Rail, rivers and tracks carry what they canYear 1Gravel first; 29 km a day of highway
My own sequence, built on the freight shares and building pace above. The bike outlasts the truck because it needs less fuel and less surface.

Verdict: could you still tour India with no roads?

Verdict: possible with changes

The physics allows it: on firm dirt a loaded bike needs only about 2.3 kW at 40 km/h, so Bengaluru to Kolkata becomes a seven-to-nine-day ride instead of two. What stops you is sand, where rolling resistance of 0.3 demands a traction ratio near 0.5, and rivers without bridges. The changes: a light bike, low tyre pressures for sand, a route along firm ridges and railway service tracks, and fuel, which in a roadless India would be the scarcest thing of all.

On firm dirt, the engine is never the problem. The tyre, the sand and the river are.From the working above

How sensitive is this?

Very, to the surface, and hardly at all to engine size. Doubling \( C_{rr} \) from 0.06 to 0.12 roughly doubles the force at 40 km/h; doubling power changes nothing if the tyre can't grip.

  • Monsoon: wet black-cotton soil raises rolling drag and kills traction, so the season sets the speed. See monsoon onset dates for riders.
  • Hills: on a 10% dirt slope you add \( mg\sin\theta \approx 264 \) N, more than all the rolling drag on firm dirt.

    Calculated in this post from the 270 kg example mass and a 10% slope (270 x 9.81 x sin 5.7° = 264 N), against 159 N of rolling drag on firm dirt from the Engineering ToolBox coefficient of 0.06 used above, with these example inputs.

  • Load: 50 kg less luggage removes 29 N of drag on dirt and 147 N on sand.

    Calculated in this post as 50 kg x 9.81 x the rolling-resistance coefficient (0.06 on dirt, 0.3 on sand, both inside the Engineering ToolBox ranges), with these example inputs.

A WAG-9 electric locomotive hauling a long goods train through Kelve Road station
A goods train at Kelve Road. Rail carries 22% of India's freight today, and every wagon needs a road at both ends.Photo: Historical Trains, CC0, via Wikimedia Commons

More on how roads fail and how riders cope: why Himalayan roads keep sliding, whether a 125 cc bike can do Ladakh and how to send your bike by train. For why India's rail gauge is what it is, Whyblog explains broad gauge.

What if next?

Questions people ask

How long is India's road network?

About 63 lakh km in 2021–22, per PRS's analysis of MoRTH data, and MoRTH calls it the second-largest in the world. National highways were 1,46,560 km in 2025.

What share of India's freight goes by road?

About 66% of tonne-km in 2025, with rail at 22% and waterways at 8%, according to NITI Aayog's February 2026 transport report.

How much harder is it to ride on sand than on tarmac?

Rolling resistance on loose sand is about 0.2–0.4 against 0.01–0.015 on good asphalt, so a tyre needs 15 to 30 times the push to keep rolling at the same load.

Do rural roads make villages richer?

Asher and Novosad's 2020 study of PMGSY found the main effect, four years on, was workers moving out of farming, with no major change in farm output, income or assets.

Sources

  1. PRS Legislative Research: Demand for Grants 2023–24 analysis, Road Transport and Highways (about 63 lakh km in 2021–22; shares by road type, March 2019)
  2. MoRTH Year End Review 2025, via India Shipping News (Dec 2025; 1,46,560 km NH, 43,512 km four-lane, 3,052 km expressways, 29.21 km a day in 2024–25)
  3. ThePrint on NITI Aayog: Scenarios Towards Viksit Bharat and Net Zero, Transport (Feb 2026; freight 66/22/8, passenger 78/17/4/1)
  4. Asher S, Novosad P: Rural Roads and Local Economic Development, American Economic Review 110(3) (2020; PMGSY effects)
  5. Engineering ToolBox: Rolling resistance coefficients (source for 0.01–0.015 asphalt, 0.02 gravel, 0.04–0.08 soil, 0.2–0.4 loose sand)
  6. Autocar Professional: Why India's road transport continues to outpace railways in freight (Aug 2024; road about 70% of freight, rail 18.2% in 2022)
  7. Wikipedia: Dashrath Manjhi (accessed 2026; 1960 to 1982 hill cutting, 55 km to 15 km; source for the story)
rolling resistanceroad networkNITI AayogPMGSYfreight modal shareoff-road ridingTeestapower to weight
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of RoadHook Rides.

Keep reading in RoadHook Rides

From the other blogs