What if a cricket ball were bowled at the speed of sound?

A 160 g ball at 343 m/s carries 9.4 kJ, decelerates at 160 g, and reaches the batter in 67 milliseconds, just after the sound of its own release.

A fast bowler in his delivery stride during a first-class match at Cambridge
Photo: Acabashi, CC BY-SA 4.0, via Wikimedia Commons

A cricket ball bowled at the speed of sound, 343 m/s, would leave the hand with 9.4 kJ of kinetic energy, 58 times a 160 km/h delivery, and air drag would slow it at about 160 g. It would reach the batter roughly 67 milliseconds later at about Mach 0.76, still carrying around 5.5 kJ, and the crack of its release would arrive a few milliseconds before it did. No human arm can do it, but a compressed-gas cannon could.

Key takeaways
  • 161.3 km/h (44.8 m/s) is the fastest delivery ever measured; Mach 1 is 7.7 times faster.
  • 9.4 kJ of energy at release, 58 times a normal express delivery.
  • 67 ms to reach the batter, against 58.7 ms for the sound of the release.
  • Mach 0.76 and about 5.5 kJ left when it arrives, enough to split willow.
  • A gas gun can do it: the ideal limit for air is about 1,715 m/s.

The fastest delivery measured in international cricket is Shoaib Akhtar's 161.3 km/h (about 44.8 m/s) at the 2003 World Cup. The speed of sound at 20 °C is 343 m/s, or 1,235 km/h, so this what-if asks for a ball 7.7 times faster than the record.

Here is what the physics says happens to the ball, the air, the bat and the batter, with the full working.

161.3 km/hfastest recorded delivery, Shoaib Akhtar, 2003
1,235 km/hspeed of sound at 20 °C
9.4 kJkinetic energy of a 160 g ball at Mach 1
67 msflight time over 20.12 m with drag

What are the assumptions?

The ball is a standard men's cricket ball released at exactly the speed of sound and travelling the 20.12 m length of the pitch as a full toss, so the bounce does not complicate the numbers. Air is at sea level and 20 °C.

How close has anyone come?

The story

On 22 February 2003, at Newlands in Cape Town, Shoaib Akhtar ran in to England's Nick Knight in a World Cup match. For nearly three decades the reliably measured record had been Jeff Thomson's 99.7 mph, filmed with high-speed cameras at Perth in 1975. Akhtar's delivery was clocked at 100.2 mph, 161.3 km/h. Knight simply nudged it into the leg side for a single, and only when the scoreboard flashed the reading did the ground realise the 100 mph barrier had fallen. Guinness lists it as the fastest delivery, although the ICC has said speed guns are not uniform enough to make any single reading official.

Sky Sports (Benedict Bermange): Who is cricket's fastest ever bowler?

That single, played off a ball doing 44.8 m/s, is the baseline. Everything below multiplies it by 7.7.

The variables

SymbolMeaningValueBasis
\(m\)Ball mass0.160 kgLaws of Cricket: 156–163 g for the men's ball
\(d\)Ball diameter71.5 mmFrom the 224–229 mm circumference in the Laws
\(A\)Frontal area \( \pi d^{2}/4 \)0.00402 m²Calculated
\(a\)Speed of sound343 m/sDry air at 20 °C
\(\rho\)Air density1.2 kg/m³Sea level, 20 °C
\(C_D\)Drag coefficient near Mach 10.9 (range 0.5–1.1)My estimate; sphere drag rises sharply between Mach 0.9 and 1.1
\(x\)Distance to the batter20.12 mLength of the pitch, 22 yards
A red leather 156 g cricket ball with a raised stitched seam
A 156 g ball, at the bottom of the legal 156–163 g range. At Mach 1 the seam that makes it swing stops mattering; shock waves take over.Photo: Marie-Lan Nguyen, CC BY 2.5, via Wikimedia Commons

How much energy does a Mach 1 cricket ball carry?

A 160 g ball at 343 m/s carries 9.4 kJ, which is 58 times the energy of a 45 m/s fast delivery, because kinetic energy grows with the square of speed. Speed is the whole story here; the ball's mass barely matters.

\[ KE = \tfrac{1}{2} m v^{2} = \tfrac{1}{2} \times 0.160 \times 343^{2} = 9{,}410\ \text{J} \]
\[ \frac{KE_{343}}{KE_{45}} = \left(\frac{343}{45}\right)^{2} = 58 \]

A normal 45 m/s delivery carries 162 J. The Mach 1 ball carries what a small car rolling at walking pace does, packed into a fist-sized sphere of cork and leather.

What does the air do to the ball?

The air brakes the ball at roughly 160 times gravity and builds shock waves around it, because a sphere hits its critical Mach number at only about 0.6. Over 20 metres the ball loses about a quarter of its speed and over 40% of its energy.

Why swing stops mattering

At ordinary bowling speeds, cricket aerodynamics is a story of swing: the seam trips or reshapes the boundary layer on one side, so the ball curves. Near Mach 1 that story is irrelevant.

NASA's wind tunnel tests on spheres show the flow changing in stages as speed rises:

  • Mach 0.60: local sonic flow appears near the widest point of the sphere.
  • Mach 0.80: a local normal shock is well established.
  • Mach 0.95: a shock stands on the model, and drag keeps rising through the range.

Khalloufi and Capecelatro summarise the data, compiled from 18th- and 19th-century cannon firings and modern free-flight ranges: between Mach 0.9 and 1.1 the drag coefficient climbs sharply as a bow shock forms.

How the flow round a ball changes near Mach 1 (NASA TM-109016)Mach 0.60sonic patchMach 0.80normal shockMach 0.95shock on the ballAir flows left to right. Shaded = local supersonic flow; thick lines = shocks.
A simplified drawing of the stages NASA Langley photographed with Schlieren optics. By the time the ball nears Mach 1, a shock wave, not the seam, sets the drag.

The worked derivation: speed along the pitch

The drag force is \( F = \tfrac{1}{2}\rho C_D A v^{2} \). Newton's second law, written in terms of distance rather than time, gives a clean solution:

\[ m\,v\frac{dv}{dx} = -\tfrac{1}{2}\rho C_D A v^{2} \;\Rightarrow\; v(x) = v_0\,e^{-x/L}, \qquad L = \frac{2m}{\rho C_D A} \]
  1. Decay length. \( L = \dfrac{2 \times 0.160}{1.2 \times 0.9 \times 0.00402} = 73.8\ \text{m} \). The ball loses 63% of its speed every 73.8 m.
  2. Speed at the batter. \( v = 343\,e^{-20.12/73.8} = 261\ \text{m/s} \), Mach 0.76.
  3. Initial deceleration. \( F_0 = \tfrac{1}{2} \times 1.2 \times 0.9 \times 0.00402 \times 343^{2} = 255\ \text{N} \); divided by 0.160 kg that is 1,594 m/s², about 162 g.
  4. Flight time. Integrating \( dt = dx/v \): \( t = \dfrac{L}{v_0}\left(e^{x/L}-1\right) = \dfrac{73.8}{343}\left(e^{0.273}-1\right) = 0.0674\ \text{s} \).
  5. Energy at the batter. \( \tfrac{1}{2} \times 0.160 \times 261^{2} = 5{,}460\ \text{J} \).

Does the ball get hot?

The air at the nose of the ball is compressed and heated. The stagnation temperature rise is \( \Delta T = v^{2}/(2c_p) = 343^{2}/(2 \times 1005) = 58.5\ \text{K} \).

The leather sees air at about 80 °C for less than a tenth of a second, which scorches nothing. The ball survives the flight; it is the landing that is the problem.

Aerodynamics of a Sphere and an Oblate Spheroid for Mach Numbers from 0.6 to 10.5 Including Some Effects of Test ConditionsM. Leroy Spearman, Dorothy O. Braswell · NASA Technical Memorandum 109016 · 1993

NASA Langley tested 6-, 9- and 12-inch spheres and an oblate spheroid in three wind tunnels from Mach 0.60 to 10.5. Schlieren photographs showed local sonic flow near the sphere's maximum diameter at Mach 0.60, roughly the sphere's critical Mach number, a local normal shock at 0.80 and a shock on the model by 0.95, with drag rising with Mach number through the transonic range. Drag accuracy was about 0.01 in coefficient. The limit: spheres in tunnels can suffer wall interference, which the authors demonstrate for their larger models.

Read the report (free)

Use this to check what you just read: change the release speed, the drag coefficient or the pitch length, and watch the arrival speed and energy move.

Your supersonic delivery

Would the batter see it coming?

No. The ball arrives in about 67 ms, while skilled batters track a normal delivery for more than half a second and need a few hundred milliseconds just to start a stroke. Strangely, the batter would hear the release before the ball arrived.

How batters actually watch the ball

Land and McLeod tracked the eye movements of batters facing a bowling machine. Their batters followed a three-step routine:

  1. Fix on the release as the ball leaves the hand.
  2. Jump the gaze ahead with a predictive saccade (a fast eye jump) to where they expect the bounce.
  3. Track the ball for 100 to 200 ms after it pitches.

A short latency for that first saccade was what separated good batters from poor ones. Against a Mach 1 ball, the entire flight fits inside the time it takes to launch the first saccade.

The race between the ball and its own sound

The release crack travels at 343 m/s without slowing, taking \( 20.12/343 = 58.7 \) ms. The ball, braking hard, takes about 67 ms. So the batter hears the delivery roughly 9 ms before it reaches them, and has no time to do anything with that information.

The 22-yard race, in milliseconds020406070 msSound of release: arrives at 58.7 msMach 1 ball, braking: arrives at 67.4 msBatter's first eye jump and stroke: hundreds of ms (off the scale)The sound wins by about 9 ms. The batter loses by an order of magnitude.
Flight times from the drag working above (C_D = 0.9). A normal 150 km/h ball takes about 480 ms over the same distance, which is why batting is possible at all.
From eye movements to actions: how batsmen hit the ballMichael F. Land, Peter McLeod · Nature Neuroscience 3(12) · 2000

The authors recorded where batters looked while facing fast deliveries. Batters watch the release, jump their gaze ahead to the predicted bounce point, wait for the ball, then track it for 100–200 ms after the bounce, which lets them judge where and when it will arrive even though they see it for little more than half a second. Shorter latency of the first saccade marked better players. The limit: a small number of batters of different standards, facing a machine rather than live bowling.

Read the abstract (free)
A willow cricket bat lying beside a red cricket ball
Bat and ball. The bat is built to absorb a 162 J fast delivery; the Mach 1 ball brings about 5,460 J to the crease.Photo: Marie-Lan Nguyen, CC BY 2.5, via Wikimedia Commons

What happens to the bat and the stumps?

The bat would take an average force of about 47 kN, close to five tonnes, if the impact lasts a millisecond. Willow would split and the cork core of the ball would likely burst; the stumps would simply be cut through by 5.5 kJ.

  1. Momentum change. The ball arrives at 261 m/s; assume it rebounds at 40 m/s (my estimate). \( \Delta p = m(v_{in} + v_{out}) = 0.160 \times 301 \approx 48\ \text{N·s} \).
  2. Average force. With a contact time of about 1 ms (my estimate, typical of hard-ball impacts), \( F = \Delta p/\Delta t \approx 48\ \text{kN} \), the weight of about 4.8 tonnes.
  3. Energy to absorb. 5,460 J at the batter, against about 162 J from a normal fast ball. The bat, gloves and wrists were designed for the second number, not the first.

If the ball misses the bat, the stumps meet 5.5 kJ concentrated on a 72 mm sphere. The bails would not fly; the timber would break, and the umpire would have no doubt about bowled.

The batter hears the delivery about 9 milliseconds before it arrives, and has no time to do anything with that information.The working of this post
Kinetic energy of a 160 g cricket ball at different speeds
See the data as a table
Kinetic energy (J)
Club pace 30 m/s72
Express 45 m/s162
Record 44.8 m/s161
Mach 1 at batter5460
Mach 1 at release9410

Source: My calculation from the Laws of Cricket ball mass and Shoaib Akhtar's 161.3 km/h record · KE = ½mv²; Mach 1 at batter uses C_D = 0.9 over 20.12 m.

A bowler running in to deliver during a county cricket match at Radlett
A bowler at the crease. The fastest arms in cricket release the ball at about 45 m/s; Mach 1 needs 7.6 times that speed and 58 times the energy.Photo: Acabashi, CC BY-SA 4.0, via Wikimedia Commons

Could anything actually bowl it?

No human could, but a compressed-gas cannon could, because the theoretical speed limit of an air-driven gun is about five times the speed of sound in the gas. The arm is the weak link by a factor of nearly sixty in energy.

Why the arm fails

Fast bowlers release the ball at 27 to 45 m/s, according to the Cambridge review of swing. To reach 343 m/s, the arm would have to deliver 9.4 kJ.

Done over 0.1 s, a generous delivery stride, that is 94 kW, more than a 125 hp motor, from one shoulder. Muscle and tendon cannot approach it.

Why a gas gun succeeds

When a high-pressure gas expands behind a projectile, the gas itself has a speed limit set by its own speed of sound \(a_0\). From the theory of unsteady expansion waves, the maximum speed the gas front can reach is

\[ u_{max} = \frac{2 a_0}{\gamma - 1} = \frac{2 \times 343}{1.4 - 1} = 1{,}715\ \text{m/s} \]

for air with heat-capacity ratio \( \gamma = 1.4 \). Real guns reach only a fraction of this because of the projectile's mass and friction, but 343 m/s for a 160 g ball sits comfortably within what a long barrel and a high-pressure reservoir can do.

LauncherRelease speedEnergy at releaseMach 1 possible?
Club bowlerabout 30 m/s72 JNo
Fastest human (Akhtar, 2003)44.8 m/s161 JNo, short by 58 times in energy
Air gas gun, ideal limitup to 1,715 m/sfar above 9.4 kJYes
A review and reassessment of the aerodynamics of cricket ball swingSam D. Grimshaw, Aaron Briggs, Nick R. Atkins · Flow 4, E6 · 2024

The Whittle Laboratory team reviewed 70 years of swing research and compared it with ball-tracking data from Test matches, including 6,982 first-over deliveries between 2006 and 2018 above 60 mph. They note that swing bowlers release the ball at 27 to 45 m/s, and their new measurements suggest the seam behaves more like a row of vortex generators than a simple trip, with a laminar separation bubble on the seam side. The limit: all of this is incompressible flow; at Mach 1, shock waves replace swing as the governing physics.

Read the paper (free)

How sensitive is the answer?

The verdict does not depend on the drag coefficient; only the arrival speed does. Across the plausible range of \(C_D\), the ball reaches the batter at Mach 0.72 to 0.86 and in 63 to 70 ms.

Drag coefficientDecay lengthSpeed at batterFlight timeEnergy at batter
0.5132.8 m295 m/s (Mach 0.86)63.3 ms6,950 J
0.973.8 m261 m/s (Mach 0.76)67.4 ms5,460 J
1.160.4 m246 m/s (Mach 0.72)69.6 ms4,830 J

The model breaks down in two ways:

  • Constant drag coefficient: a simplification, since \(C_D\) falls as the ball slows from Mach 1 to 0.76.
  • No gravity: in 67 ms the ball drops only \( \tfrac{1}{2} g t^{2} = 2.2 \) cm, so a Mach 1 delivery is, for once, truly straight.
Verdict: possible with changes

A Mach 1 cricket ball is impossible for any bowler, because it needs 58 times the energy of the fastest human delivery. Swap the arm for a compressed-gas cannon, whose ideal limit with air is about 1,715 m/s, and it becomes straightforward. The ball would then arrive in about 67 ms at around Mach 0.76 with 5.5 kJ, faster than any batter can react and hard enough to split the bat. Possible as a lab experiment, impossible as cricket.

For why India chose this game over others, read why cricket beat hockey in India and why hockey is not the national game. The physics of speed on two wheels is in the Motoverse explainer on countersteering.

What if next?

Questions people ask

What is the fastest ball ever bowled in cricket?

Shoaib Akhtar's 161.3 km/h (100.2 mph) against England at the 2003 World Cup is the fastest recorded since speed guns came into international cricket. Guinness lists it, though the ICC does not ratify any single speed-gun reading as official.

How long does a batter have to react to a fast ball?

At 150 km/h a ball covers the 20.12 m pitch in under half a second. Land and McLeod found batters see it for little more than half a second and track it for 100–200 ms after the bounce.

What is the speed of sound in km/h?

About 1,235 km/h, or 343 m/s, in dry air at 20 °C. It rises with temperature, to roughly 352 m/s at 35 °C.

Can a bowling machine bowl faster than a human?

Yes. Machines are limited by their wheels or air pressure, not by muscle. In principle a gas gun using air could accelerate a ball toward 1,715 m/s, the ideal limit for air at room temperature.

Sources

  1. Wikipedia: Cricket ball (Laws of Cricket specification). Source for 156–163 g mass and 224–229 mm circumference.
  2. Wikipedia: Shoaib Akhtar. Source for the 161.3 km/h record.
  3. Sky Sports (Benedict Bermange): Who is cricket's fastest ever bowler?. Source for the story: Knight's single, the 100.2 mph reading and Thomson's 99.7 mph.
  4. Guinness World Records: Fastest delivery of a cricket ball (male). Source for 22 February 2003, Newlands, and the ICC's position on speed guns.
  5. Spearman M.L., Braswell D.O.: Aerodynamics of a sphere and an oblate spheroid for Mach numbers 0.6 to 10.5, NASA TM-109016 (1993). Source for critical Mach 0.6 and transonic shocks.
  6. Khalloufi M., Capecelatro J.: Drag force of a compressible flow past a random array of spheres (arXiv) (2022). Source for the sharp drag rise between Mach 0.9 and 1.1.
  7. Land M.F., McLeod P.: From eye movements to actions: how batsmen hit the ball, Nature Neuroscience (2000). Source for tracking times.
  8. Grimshaw S.D., Briggs A., Atkins N.R.: A review and reassessment of the aerodynamics of cricket ball swing, Flow (2024). Source for 27–45 m/s release speeds.
  9. Wisden: IPL 2025 fastest deliveries (2025)
  10. Gulf News: Ashok Sharma's 154 km/h (2026)
cricket ballspeed of sounddrag coefficienttransonic flowShoaib Akhtarfast bowlinggas gunreaction time
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of Whyblog.

Keep reading in Whyblog

From the other blogs