A mango and a motorcycle both get better with heat, to a point, because both are run by chemistry that speeds up with temperature by the same Arrhenius rule. A mango ripens fastest and tastes best at about 20 to 25°C; below 10°C it suffers chilling injury and near 38°C its ethylene machinery shuts down. Engine oil behaves the same way in reverse: it thins by about 18 times between 20°C and 100°C, cutting friction, until above about 110°C it oxidises twice as fast for every extra 10°C and the oil film gets dangerously thin.
- 20–23°C is the optimum ripening range for mangoes in the University of Hawai'i postharvest guidelines.
- Q10 ≈ 3.3: mango respiration rises about 3.3 times for each 10°C between 10 and 20°C.
- 324 → 17.5 mm²/s: Motul 7100 20W-50 thins about 18 times from a cold 20°C to a hot 100°C.
- 38°C for 3 days pushed a mango's ethylene peak from day 4 to day 9 (Ketsa et al., 1999).
- 2× per 10°C: the common Arrhenius rule for how fast engine oil oxidises when it runs hot.
This is a collision post: two things with no business being in the same sentence, and a real equation that ties them together. The tie here is the Arrhenius equation, the 1889 rule from the Swedish chemist Svante Arrhenius that says reaction rates climb exponentially with temperature. A mango's enzymes obey it. So does the viscosity of the oil in your sump, and so does the rate at which that oil rots.
The interesting part is the second half of the title. In both cases heat helps only up to a point, and the reason it stops helping is the same shape of problem: a second, harmful process with a steeper temperature curve takes over. Let me solve each side with real numbers, then put them on one graph.
What does heat actually do to a mango?
Heat speeds up every enzyme in a mango, so warmer fruit breathes faster, makes ethylene sooner and turns starch into sugar quicker. A mature green mango is alive after harvest: it respires, burning its own sugar and giving off carbon dioxide and heat.
On 18 May 2024, with mango season at its peak, India's food regulator FSSAI put out an alert telling fruit traders and ripening-chamber operators to stop using masala, the trade name for calcium carbide. Carbide reacts with moisture to release acetylene, which mimics the fruit's own ripening hormone, and industrial carbide carries traces of arsenic and phosphorus. Its use is banned under the Food Safety and Standards (Prohibition and Restrictions on Sales) Regulations, 2011. FSSAI pointed traders instead to ethylene gas at up to 100 ppm, the molecule the mango makes itself, and asked state food safety officers to act against violators. The whole fight is about one thing: forcing a temperature-and-hormone process to run faster than the fruit wants.
Business Today: Stop using banned calcium carbide for ripening fruits, government warns traders (18 May 2024)Mango is a climacteric fruit: at the start of ripening it has a burst of respiration and ethylene production. Ethylene is made in two enzyme steps, ACC synthase (ACS) and ACC oxidase (ACO), and it then switches on the softening, colour and aroma genes. Every one of those steps is an enzyme reaction, and enzyme reactions speed up with heat.
The cleanest measurement of that speed-up is the respiration table in the University of Hawai'i's postharvest guidelines, compiled from Karmarkar and Joshi (1941) and Lam (1987):
| Storage temperature | Respiration (mg CO₂ per kg per hour) | Midpoint |
|---|---|---|
| 4.5°C | 10 to 22 | 16 |
| 10°C | 23 to 46 | 34.5 |
| 15°C | 45 to 90 | 67.5 |
| 20°C | 75 to 151 | 113 |
See the data as a table
| Low end (mg CO₂/kg/h) | High end (mg CO₂/kg/h) | |
|---|---|---|
| 4.5°C | 10 | 22 |
| 10°C | 23 | 46 |
| 15°C | 45 | 90 |
| 20°C | 75 | 151 |
Source: Paull and Chen, Mango: Postharvest Quality-Maintenance Guidelines, UH CTAHR F_N-43 (2014) · Ranges cover different cultivars and studies.
How fast is a mango burning itself?
At 20°C a mango gives off about 113 mg of CO₂ per kg per hour. That is slow combustion of sugar, the same chemistry as a fuel burning in a cylinder, only at body-like temperatures and with enzymes instead of a spark.
- Moles of CO₂. \( 0.113\ \text{g} \div 44\ \text{g/mol} = 2.57\ \text{mmol per kg per hour} \).
- Energy per mole of CO₂. Burning one glucose releases about 2,800 kJ and six CO₂, so about 467 kJ per mol of CO₂.
- Heat output.
\[ P = \frac{2.57\times10^{-3}\ \text{mol/h} \times 467{,}000\ \text{J/mol}}{3600\ \text{s/h}} \approx 0.33\ \text{W per kg} \]
A tonne of mangoes at 20°C is therefore a 330 W heater. The Hawai'i guide's own conversion (multiply mg/kg/h by 61 to get kcal per tonne per day) gives the same number: 113 × 61 ≈ 6,900 kcal per day, or about 334 W. This is why ripening rooms need cooling, and it is the first real link to the engine: a ripening mango is a very slow, very cool combustion engine.

How much faster does a mango ripen for every 10°C?
About 3.3 times faster for every 10°C rise between 10 and 20°C, judged by respiration, which corresponds to an activation energy of roughly 82 kJ/mol. This is the Q10 coefficient, the ratio of a rate at one temperature to the rate 10°C cooler.
Here is the derivation from the Hawai'i data, using the midpoints.
- Q10 from the table.
\[ Q_{10} = \frac{R_{20}}{R_{10}} = \frac{113}{34.5} \approx 3.3 \]
- The Arrhenius equation. A reaction rate \(k\) depends on absolute temperature \(T\) as
\[ k = A\,e^{-E_a/RT} \]where \(E_a\) is the activation energy and \(R = 8.314\) J/mol·K.
- Convert Q10 to activation energy. Taking the ratio of the rates at \(T_1 = 283.15\) K and \(T_2 = 293.15\) K:
\[ E_a = \frac{R\,T_1 T_2 \ln Q_{10}}{T_2 - T_1} = \frac{8.314 \times 283.15 \times 293.15 \times \ln 3.3}{10} \approx 82\ \text{kJ/mol} \]
- Days to ripen at another temperature. If a fruit takes \(t_{20}\) days at 20°C, then
\[ t(T) = t_{20}\,Q_{10}^{-(T-20)/10} \]Gill and colleagues followed Langra mangoes for 168 hours (7 days) at 20°C, so take \(t_{20} = 7\) days as an estimate. At 30°C: \( 7 \times 3.3^{-1} \approx 2.1 \) days. At 15°C: \( 7 \times 3.3^{0.5} \approx 12.7 \) days.
Sensitivity check
The table's ranges are wide, so Q10 is uncertain. The low ends (75 ÷ 23) and the high ends (151 ÷ 46) both give 3.3. But the 15 to 20°C step alone gives 1.67 for 5°C, which is about 2.8 per 10°C.
A Q10 anywhere from 2 to 3.3 puts ripening at 30°C between 2.1 and 3.5 days, against 7 at 20°C. The conclusion survives: each 10°C cuts ripening time by half to two-thirds.
The team at Punjab Agricultural University ripened physiologically mature Langra mangoes at 20°C, 25°C and room temperature (29.8–33.6°C), sampling four replicates every 24 hours from 48 to 168 hours. Pulp colour developed faster in warmer fruit, and β-carotene peaked at 2.23 mg per 100 g after 120 hours at room temperature. Soluble solids rose from 12.3% to 17.9% on average. Yet the fruit ripened at 25°C was rated "very much liked" while 20°C and room-temperature fruit were only "moderately liked". The limit: one cultivar, one season, and no ethylene or firmness measurements.
Read the paper (free)Why does a mango stop getting better when it gets too hot?
Because the enzymes that make ethylene start to fail above the mid-30s °C, so a hot mango keeps breathing but stops ripening properly. Ketsa and colleagues showed it directly: three days at 38°C made the key enzyme ACC synthase undetectable.
Nam Dokmai mangoes were held at 38°C for 3 days and then moved to 20°C, against unheated fruit kept at 25°C. Unheated fruit hit their ethylene peak on day 4; heated fruit peaked on day 9, six days after the heat ended. Right after heating, ACS activity was undetectable, and ACO activity in peel discs was 8 times lower than in unheated fruit. ACO recovered fully, ACS only partly, though enough to ripen eventually. The limit: one cultivar and one heat dose, with the work done on whole fruit and tissue discs, not across a range of temperatures.
Read the abstract (FAO AGRIS)Biologists model this rise-then-crash with an Arrhenius term multiplied by an inactivation term, the approach behind the Sharpe–Schoolfield model of temperature-dependent development:
The first factor climbs gently. The second has a far larger energy \(E_h\), so it collapses sharply around a temperature \(T_h\). For mango ethylene synthesis, the Ketsa data put \(T_h\) somewhere below 38°C. I have not found a paper that fits these constants for mango, so treat the equation as the shape, not a fitted curve.
And when it is too cold?
Below about 10°C most mango cultivars show chilling injury: greyish scald on the skin, pitting, uneven ripening and poor flavour, according to the Hawai'i guidelines. Cold does not just slow the enzymes; it damages membranes, and the harm often shows only after the fruit is warmed up. That gives the mango a window, not a one-way slope:
- Below 10°C: chilling injury in most cultivars (riper fruit tolerates more).
- 10–13°C: storage for 14 to 28 days for mature green fruit.
- 20–23°C: the guide's optimum for appearance, flavour and decay control; 25°C scored best for Langra.
- Around 30–34°C: fast ripening and colour, but lower taste scores in the Punjab trial.
- 38°C for days: ethylene synthesis suppressed; ripening stalls, then resumes late.
What does heat do to a motorcycle engine?
Heat thins the oil, and thinner oil means less friction in the bearings, so a warm engine is freer, smoother and more efficient than a cold one. The thinning is dramatic, as the datasheet of the oil that Sapta has run in his Pulsar NS200 shows.
Motul's June 2024 datasheet for Motul 7100 20W-50 gives a kinematic viscosity of 119.5 mm²/s at 40°C and 17.5 mm²/s at 100°C, with a viscosity index of 162. To get viscosity at any other temperature, engineers use the Walther equation, the basis of ASTM D341:
- Point one, 40°C (313.15 K). \( \log_{10}\log_{10}(120.2) = 0.3181 \); \( \log_{10} 313.15 = 2.4958 \).
- Point two, 100°C (373.15 K). \( \log_{10}\log_{10}(18.2) = 0.1004 \); \( \log_{10} 373.15 = 2.5719 \).
- Slope and intercept.
\[ B = \frac{0.3181 - 0.1004}{2.5719 - 2.4958} \approx 2.859, \qquad A = 0.3181 + 2.859 \times 2.4958 \approx 7.453 \]
- Cold start at 20°C (293.15 K). \( 7.453 - 2.859 \times 2.4671 = 0.3998 \), so \( \nu = 10^{10^{0.3998}} - 0.7 \approx 324\ \text{mm}^2/\text{s} \).
So the oil is about 18.5 times thicker at a 20°C start than at 100°C. Here is the full curve from the same equation.
See the data as a table
| Kinematic viscosity (mm²/s) | |
|---|---|
| 10°C | 593 |
| 20°C | 324 |
| 30°C | 191 |
| 40°C | 119.5 |
| 60°C | 54.6 |
| 80°C | 29.2 |
| 100°C | 17.5 |
| 120°C | 11.5 |
| 150°C | 6.9 |
Source: Motul 7100 20W-50 technical data sheet (June 2024): 119.5 mm²/s at 40°C and 17.5 mm²/s at 100°C · Only the 40°C and 100°C points are measured; the rest are calculated with the Walther (ASTM D341) equation fitted to them.
Why does thinner oil mean less friction?
In a hydrodynamic plain bearing, like a crankshaft journal, friction is shear of the oil film, and Petroff's law says the friction torque is directly proportional to the oil's viscosity:
Here \(\eta\) is dynamic viscosity, \(r\) and \(L\) the journal radius and length, \(\omega\) the shaft speed and \(c\) the radial clearance. Hold the geometry and speed fixed, and the film friction at 20°C is roughly 18 times what it is at 100°C. That is why an engine feels tight and revs lazily when cold.
Whole engines don't show an 18-fold change, because piston rings and the valve train also run in mixed and boundary lubrication, where viscosity matters less. But the effect is measurable. Macián and colleagues found that switching a diesel engine from heavier oils to a 5W-20 cut the torque needed to spin it unfired by up to 14%, and fuel use at low speed and load by up to 4.4%.
The CMT-Motores Térmicos group in Valencia tested a light-duty diesel on a bench with three oils: a 5W-20 against heavier 5W-30 and 15W-40 grades. They ran motored tests, 12 steady fired points and the NEDC cycle. Motored torque fell by 1.9 to 14.3% across 1,000 to 4,000 rpm with the thinner oil, and fuel use fell up to 4.4% at 1,000 rpm and low load. The benefit was larger in the cold-start part of the cycle. The limit: one engine, and at high load the advantage shrank or reversed.
Read the paper (free)
Why does an engine stop getting better when it gets too hot?
Two things go wrong above the window: the oil film gets too thin to separate the metal, and the oil itself oxidises roughly twice as fast for every 10°C. The first is mechanical, the second is chemistry, and the second is Arrhenius again.
The film gets too thin
The minimum film thickness in a journal bearing scales with viscosity times speed divided by load, the dimensionless group called the Sommerfeld number. Plot friction against that group and you get the Stribeck curve: friction falls as the film builds, bottoms out, then climbs again in full hydrodynamic flow. Push oil temperature from 100°C to 150°C and Motul 7100's viscosity falls from 17.5 to about 6.9 mm²/s, so the film is about 2.5 times thinner for the same load. That moves the bearing left on the Stribeck curve, towards metal contact and wear.
Oil makers guard against this with the HTHS viscosity, measured at 150°C under very high shear. Motul quotes 4.6 mPa·s for 7100 20W-50.
The oil rots faster
Oil oxidation is a chemical reaction, so it follows Arrhenius. The working rule in lubrication engineering, explained by Noria's Machinery Lubrication, is that every 10°C rise roughly doubles the oxidation rate and halves the oil's life. STLE's R. David Whitby puts it at double or treble.
With the doubling rule, oil held at 130°C ages eight times faster than at 100°C. With the trebling rule, 27 times. Sludge, varnish and acid build-up follow.
Is it really the same law in both?
Yes, with a twist: in the mango, Arrhenius drives a rate up, and in the oil, a closely related Arrhenius-type law drives viscosity down. For liquids, viscosity falls roughly as \( \eta \propto e^{E_\eta/RT} \), the Andrade equation, because molecules need an activation energy to slide past each other.
From the datasheet's two points, the apparent flow activation energy of Motul 7100 is:
That is the same kind of number as the mango's 82 kJ/mol, from the same kind of equation. The parallels line up neatly:
| Feature | Ripening mango | Warming engine |
|---|---|---|
| Useful process | Ethylene, softening, sugar, colour | Oil thinning, less film friction |
| Governing law | Arrhenius, Q10 ≈ 3.3 | Andrade/Walther viscosity, E ≈ 31 kJ/mol |
| Too cold | Chilling injury below about 10°C | Thick oil, high friction, slow oil flow |
| Window | 20–25°C | About 80–110°C oil (my estimate) |
| Too hot | ACS shut down by 38°C | Thin film, oxidation 2× per 10°C |
| Hidden combustion | Respiration, about 0.33 W/kg | Fuel burning, kilowatts |
Where does the comparison break down?
The analogy holds for the mathematics of the window, not for everything else. Three honest limits:
- Direction. A mango is a one-way trip: ripening is irreversible and ends in rot. An engine cycles through its window thousands of times.
- Control. An engine has a thermostat, radiator and fan to hold its window. A mango has none; the window has to be supplied by the room or the ripening chamber.
- Numbers. The engine window of about 80 to 110°C oil is my estimate from the viscosity and oxidation curves, not an OEM figure; manufacturers set their own targets and they vary by engine.
Check both windows yourself
Use this to check what you just read. Set a ripening room temperature and an oil temperature and see what each does.
Mango and engine-oil temperature windows
A mango and a motorcycle both improve with heat for the same reason, Arrhenius-type temperature dependence: mango respiration speeds up about 3.3 times per 10°C, and engine oil thins about 18 times from 20 to 100°C. Both then hit a ceiling set by a steeper damaging process: ethylene synthesis collapses by 38°C in the mango, and oil oxidation doubles every 10°C above the engine's window. The analogy is exact for the shape of the window and breaks down for control and reversibility.
Heat is a loan. Every system in this post borrows speed from it, and pays it back with damage once the temperature passes the window.
For more on what heat does in the kitchen, see the Maillard reaction in Indian cooking, how a pressure cooker uses temperature, why idli batter is so temperature-sensitive and tea oxidation, another enzyme clock. On the bike side, read the motorcycle oil change guide.
What's new
- Heat and temperature swings cut Devgad Alphonso output by an estimated 85–90% Business Today / Reuters, May 2026
- FSSAI warns traders against carbide, backs ethylene ripening up to 100 ppm Business Today, May 2024
- How heat affects lubricants: the Arrhenius rate rule explained Machinery Lubrication, 2024
What if next?
- The dabba in your bag is a thermos is a spacesuit: the other half of the heat story, keeping temperature where you want it.
- Tadka is a chemistry extraction, and so is perfume: hot fat, another temperature window, this time for aroma.
- Idli batter and bread dough are the same factory: microbes with their own Q10 and their own too-hot point.
Questions people ask
What is the best temperature to ripen mangoes at home?
About 20 to 25°C. The University of Hawai'i guidelines give 20–23°C as optimum, and a Punjab Agricultural University trial found Langra mangoes ripened at 25°C tasted best. In an Indian summer kitchen above 30°C they ripen faster but often taste flatter.
Why shouldn't you keep raw mangoes in the fridge?
Most cultivars suffer chilling injury below about 10°C: grey scald, pitting, uneven ripening and weak flavour. Ripe mangoes tolerate cold better, and the Hawai'i guide allows ripe fruit at 7–8°C.
Should you warm up a motorcycle before riding?
Cold oil is much thicker: Motul 7100 20W-50 is about 324 mm²/s at 20°C against 17.5 at 100°C. A gentle first few kilometres lets it thin and flow while the engine warms; follow your manual rather than long idling.
Can engine oil get too hot?
Yes. The working rule is that oxidation roughly doubles with every 10°C rise, halving oil life, and very hot oil forms a thinner film between moving parts.
Sources
- Paull RE, Chen CC: Mango: Postharvest Quality-Maintenance Guidelines, University of Hawai'i CTAHR F_N-43 (2014) (respiration table, 20–23°C optimum, chilling below 10°C, heat-output conversion)
- Gill PPS, Jawandha SK, Kaur N: Transitions in mesocarp colour of mango fruits kept under variable temperatures, J Food Sci Technol (2017) (Langra at 20, 25 and 29.8–33.6°C; 25°C best sensory)
- Ketsa S et al.: Ethylene synthesis in mango fruit following heat treatment, Postharvest Biology and Technology 15:65–72 (1999) (38°C suppresses ACS and ACO; peak day 9 vs day 4)
- Motul: 7100 20W-50 4T technical data sheet (2024) (119.5 and 17.5 mm²/s, VI 162, HTHS 4.6 mPa·s)
- Macián V et al.: Low viscosity oils and diesel fuel consumption, Tribology International 79:132–139 (2014) (up to 14% motored torque, up to 4.4% fuel)
- Fitch B (Noria): How heat affects lubricants, the Arrhenius rate rule, Machinery Lubrication (oxidation doubles per 10°C)
- Whitby RD: Extending lubricant life, STLE Tribology and Lubrication Technology (2009) (oxidation doubles or trebles per 10°C)
- Business Today: FSSAI warns traders against calcium carbide ripening (2024) (story; ethylene up to 100 ppm)
- Business Today / Reuters: Weather devastates Maharashtra's Alphonso belt (2026) (85–90% Devgad loss)
- Wikipedia: Arrhenius equation (form of the equation, Arrhenius 1889)
