What if all 1.4 billion of us wanted chai at the same minute?

86,500 tonnes of milk, 2,800 tonnes of tea, 2.7 lakh cylinders of LPG and a grid that would need eight times its record peak. The ingredients are fine. The minute is the problem.

Inside a Kolkata tea stall: kettles, a gas burner, glasses and tea-making apparatus on a counter
Photo: Wasir kasab, CC BY 4.0, via Wikimedia Commons

If all 1.4 billion of us wanted chai at the same minute, India would have the ingredients: about 86,500 tonnes of milk (13% of one day's national output), 2,800 tonnes of tea leaf (roughly what the country already drinks in a day) and 11,200 tonnes of sugar. What India would not have is the heat.

Key takeaways
  • Ingredients are fine: 86,500 t of milk is 12.7% of a day's output; 2,800 t of tea is 87% of a normal day's drinking.
  • One cup needs about 75 kJ of useful heat, 126 kJ of LPG at 60% stove efficiency.
  • Doing it in one minute on induction needs 2.07 TW, 7.6 times India's record 270.82 GW peak.
  • On the LPG stoves India already owns, a family pan takes about 4.8 minutes.
  • Verdict: possible with changes. Widen the minute to about five.

Boiling 1.4 billion cups in 60 seconds needs about 2 terawatts of electricity or a 8.4 kW burner in every kitchen; spread over five minutes on the household LPG stoves India already owns, it works.

This is the classic engineer's trap: a problem that looks like a supply problem and turns out to be a power problem. Energy (joules) is about how much; power (watts) is about how fast. Chai for a nation is a modest amount of energy delivered absurdly fast. Here is the full working, with every input sourced or flagged as my estimate.

86,500 tmilk for one cup each, 60 ml per cup
176 TJLPG heat needed at 60% stove efficiency
2.07 TWelectric power to do it on induction in one minute
270.82 GWIndia's all-time peak demand, 21 May 2026

What are the assumptions?

The model is one standard cup of masala-free kadak chai per person, brewed fresh, at the same minute everywhere. I fix the recipe and the physics first so that every later number can be checked.

SymbolMeaningValueBasis
\(N\)People1.40 × 10⁹The premise; UN estimates put India near 1.46 billion, tested below
\(V_m\)Milk per cup60 mlMy recipe assumption (half the finished cup)
\(V_w\)Water per cup75 ml, of which 15 ml boils offMy recipe assumption
\(m_t\), \(m_s\)Tea leaf, sugar2 g, 8 gMy recipe assumption
\(c\)Specific heat of the milk-water mix4.1 kJ/kg·KBetween milk (~3.9) and water (4.18)
\(L_v\)Latent heat of vaporisation of water2,257 kJ/kgStandard steam-table value
\(\eta\)LPG stove efficiency0.60BPCL test data: 70% for a new LPG stove, 55% after conversion
LHVHeating value of LPG46 MJ/kgPropane 46.35, butane 45.75 MJ/kg

Has India ever done anything at the same minute?

The story

Once, and the grid noticed. At 9 p.m. on 5 April 2020, during the COVID-19 lockdown, households across India switched off their lights for nine minutes. The grid operator, POSOCO, had planned for a drop of 12–14 GW. All-India demand started falling at 8:45 p.m. and bottomed out at 85,799 MW at 9:10 p.m., a fall of 31,089 MW, more than twice the forecast.

Operators kept the frequency between 49.70 and 50.26 Hz mainly with hydro: they cut hydro output from 25,559 MW to 8,016 MW as the lights went off, then ramped it back to 19,012 MW in 17 minutes as they came on. That was a nation doing something less at the same minute. The chai minute asks for the opposite, a surge of about 2 TW, and it is the ramp, not the fuel, that breaks it.

Power Line: When the Lights Went Off, POSOCO manages the load during the nine-minute event (8 April 2020)
A glass of milky chai on a restaurant table
One glass. The question is what happens when you multiply it by 1.4 billion and squeeze it into sixty seconds.Photo: Jamie, CC BY 2.0, via Wikimedia Commons

How much milk, tea and sugar would one chai minute need?

One chai minute needs about 86,500 tonnes of milk, 2,800 tonnes of tea and 11,200 tonnes of sugar, which India produces or holds comfortably. The surprise is tea: the country already drinks almost exactly this much on an ordinary day.

The working is plain multiplication. Milk is \(N \times V_m \times \rho\), with milk density about 1.03 kg/l:

\[ M_{milk} = 1.4\times10^{9} \times 0.060\,\text{l} \times 1.03\,\tfrac{\text{kg}}{\text{l}} = 8.65\times10^{7}\,\text{kg} \approx 86{,}500\ \text{t} \]

Milk

India produced 247.87 million tonnes of milk in 2024-25, per the Department of Animal Husbandry and Dairying, which is about 6.79 lakh tonnes a day. Our chai minute takes 12.7% of a single day's milk. Per-capita availability is 485 g a day; a cup uses 62 g of it.

Tea, sugar and water

Tea leaf: 2 g each gives 2,800 tonnes. Indian per-capita consumption is about 840 g a year, which for 1.4 billion people is 3,222 tonnes a day. So the national chai minute uses 87% of what India drinks in a normal day. We do not need more tea; we need all of today's tea at once.

Sugar: 8 g each gives 11,200 tonnes. ISMA put 2024-25 domestic sugar consumption at about 280 lakh tonnes, or 76,700 tonnes a day, so the chai minute takes 14.6% of a day's sugar. Water: 75 ml each is 1,05,000 cubic metres, about 42 Olympic pools, which is nothing for a country whose cities each pump hundreds of millions of litres a day.

IngredientPer cupTotal for 1.4 billionIndia's daily supplyShare of one day
Milk60 ml (62 g)86,500 t6.79 lakh t (DAHD 2024-25)12.7%
Tea leaf2 g2,800 t3,222 t (840 g per head per year)87%
Sugar8 g11,200 t76,700 t (ISMA 2024-25 estimate)14.6%
LPG2.7 g3,820 t85,800 t (31.3 Mt in 2024-25)4.5%
Water75 ml1,05,000 m³Not limitingNegligible
One national chai minute as a share of one normal day of supply
See the data as a table
Share of a day (%)
Tea leaf87
Sugar14.6
Milk12.7
LPG4.5

Source: My calculation from DAHD milk data 2024-25, Tea Board per-capita figure, ISMA 2024-25 estimate and PPAC LPG data · Assumes 60 ml milk, 2 g tea, 8 g sugar per cup and a 60% efficient LPG stove.

How much heat does one cup of chai take?

One cup of chai takes about 75 kJ of useful heat and about 126 kJ of LPG once stove losses are counted. Almost half the useful heat goes not into warming the liquid but into boiling water off, which is why chai, unlike coffee from a kettle, is an energy-hungry drink.

  1. Sensible heat. Warm 135 g of milk and water from 25 °C to 100 °C: \( Q_1 = m c \Delta T = 0.135 \times 4100 \times 75 = 41{,}500\ \text{J} \).
  2. Latent heat. Indian chai is boiled, not just heated. Boiling off 15 g of water: \( Q_2 = m_e L_v = 0.015 \times 2.257\times10^{6} = 33{,}900\ \text{J} \).
  3. Useful heat per cup. \( Q_u = Q_1 + Q_2 = 75{,}400\ \text{J} \).
  4. Fuel heat per cup. At \( \eta = 0.60 \): \( Q_f = Q_u / \eta = 125{,}600\ \text{J} \), of which 50 kJ heats the kitchen.
  5. National fuel. \( E = N Q_f = 1.4\times10^{9} \times 125{,}600 = 1.76\times10^{14}\ \text{J} = 176\ \text{TJ} \).
  6. In LPG. \( 1.76\times10^{14} / 4.6\times10^{7} = 3.82\times10^{6}\ \text{kg} \), about 3,820 tonnes, or 2.7 lakh domestic cylinders of 14.2 kg.
LPG burnt125.6 kJHeat milk and water to 100 °C41.5 kJ (33%)Boil off 15 g of water33.9 kJ (27%)Lost to air, pan and flame50.2 kJ (40%)
Where the heat in one cup of chai goes, at 60% stove efficiency. The boil-off is a recipe choice; skip it and the energy bill drops by nearly half.

By national standards 3,820 tonnes of LPG is small. India consumed about 31.3 million tonnes of LPG in 2024-25, about 85,800 tonnes a day, so the whole chai minute burns 4.5% of a normal day's gas. The cylinders are already in the kitchens: PPAC counted 32.68 crore active domestic customers of the public sector oil companies in the first quarter of 2024-25.

A row of red domestic LPG cylinders
Domestic 14.2 kg cylinders. The chai minute needs about 2.7 lakh of them, a small dent in a normal day's 85,800 tonnes of LPG.Photo: Kullatan Kin, CC0, via Wikimedia Commons

Why is one minute the real problem?

One minute is the problem because power equals energy divided by time, and 176 TJ in 60 seconds is about 2.9 terawatts of fuel heat. No stove fleet or grid on Earth can deliver that, and the limit is the burner, not the gas supply.

The governing relation is the definition of power, \( P = E / t \). Take a household of four, brewing four cups together in one pan:

\[ P_{burner} = \frac{4\,Q_f}{t} = \frac{4 \times 125{,}600\ \text{J}}{60\ \text{s}} = 8.4\ \text{kW} \]

A domestic LPG burner is rated at roughly 1.5 to 2 kW of heat input (my working figure; check the plate on your stove). At 1.75 kW the same four cups take

\[ t = \frac{4 \times 125{,}600}{1{,}750} = 287\ \text{s} \approx 4.8\ \text{minutes} \]

So home kitchens can do it in about five minutes, not one. To hit sixty seconds, every kitchen needs a burner nearly five times stronger, which is a restaurant wok burner, with the hose, regulator and ventilation to match.

The electric route is worse. Induction is efficient, so assume 85% (my estimate). The useful 75.4 kJ per cup then draws 88.7 kJ of electricity, 124 TJ nationally:

\[ P_{grid} = \frac{1.24\times10^{14}\ \text{J}}{60\ \text{s}} = 2.07\times10^{12}\ \text{W} \]

That is 2.07 TW against an all-time Indian peak of 270.82 GW, set on 21 May 2026. Even with every other appliance in the country switched off, the grid would need to be 7.6 times bigger. Solve the same equation for time and the grid can only manage the chai if the national boil is spread over at least

\[ t_{min} = \frac{1.24\times10^{14}}{2.708\times10^{11}} = 458\ \text{s} \approx 7.6\ \text{minutes} \]

and that is with zero fans, zero lights and zero trains.

P = 124 TJ / t, induction caseTime window (minutes)13571001 TW2 TWRecord peak 270.82 GW7.6 min2.07 TW at 1 minuteAbove the dashed line: no grid on Earth
The power the grid would need falls as 1/t. Only from about 7.6 minutes does the requirement drop below India's all-time peak, and that assumes nothing else is switched on. Points calculated from the equations above.

Your own national chai minute

How long would the queue at the tea stalls be?

If one in five people were away from home, about 28 crore would queue at stalls, and the last customer would wait roughly 35 minutes under my stall assumptions. The governing idea is Little's law, which links queue length, arrival rate and waiting time.

John Little proved in 1961 that for any stable queue, the average number of people in the system \(L\) equals the arrival rate \(\lambda\) times the average time each spends there \(W\):

\[ L = \lambda W \]

It holds regardless of how arrivals are distributed, which is why it is used for toll booths, factory lines and computer processors alike. Our case is the extreme opposite of stable: everyone arrives at \(t = 0\). Then the queue drains at the service rate \(\mu\), and the last customer waits \( W_{max} = L_0 / \mu \), with an average wait of half that.

  1. People at stalls. Assume 20% are out (my estimate): \( L_0 = 0.2 \times 1.4\times10^{9} = 2.8\times10^{8} \).
  2. Service rate. India has no official count of tea stalls. Assume 10 lakh stalls (my estimate), each brewing 40 cups in a 5-minute batch: \( \mu = 10^{6} \times 40/5 = 8\times10^{6} \) cups per minute.
  3. Last cup. \( W_{max} = 2.8\times10^{8} / 8\times10^{6} = 35 \) minutes; average wait about 17.5 minutes.
  4. Sensitivity. Halve the stalls and the wait doubles to 70 minutes. Double the pan size and it halves. The answer scales linearly with every assumption, which is the useful part of Little's way of thinking.
Tea served in a brown earthen kulhar cup
A kulhar. Clay cups fired from local soil were the original disposable tea cup; they matter again once you count paper cups.Photo: Ravi Dwivedi, CC BY-SA 4.0, via Wikimedia Commons

What happens to 14 crore paper cups?

If half the stall customers got paper cups, that is 14 crore cups in one minute, and laboratory work from IIT Kharagpur suggests each could shed about 25,000 micro-sized plastic particles into hot tea within 15 minutes. That figure is a lab measurement on hot water, not a measured human dose.

The particles come from the thin polyethylene lining that makes a paper cup waterproof. Multiplying the lab figure gives about 3.5 × 10¹² particles across the country in a quarter of an hour, an extrapolation that should be read as an order of magnitude only. The kulhar avoids the lining but brings its own cost: firing clay takes fuel, and supply would not stretch to crores of cups at a minute's notice.

Microplastics and other harmful substances released from disposable paper cups into hot liquidsVed Prakash Ranjan, Anuja Joseph, Sudha Goel · Journal of Hazardous Materials 404 · 2021

The IIT Kharagpur team filled disposable paper cups with hot ultrapure water at 85–90 °C, left it for 15 minutes, and counted particles by fluorescence and electron microscopy. They report about 25,000 micron-sized particles released per cup, plus ions and heavy metals from the liners; cups with room-temperature water released none. The limit: it measures release into water in a lab, not what reaches or harms a human body.

Read the study summary (free)
Little's Law as Viewed on Its 50th AnniversaryJohn D. C. Little · Operations Research 59(3) · 2011

Little's own review of the theorem he proved in 1961: the average number of items in a queuing system equals the arrival rate times the average time in the system, \(L = \lambda W\). The paper traces how it spread from cafeteria lines and toll booths to factory operations and computer architecture. The limit: it is a statement about long-run averages, so for a single burst like ours it gives the drain time, not the moment-by-moment queue shape.

Read the paper (free)
Performance Characterization of a Cluster Porous Radiant Burner for Clean and Efficient LPG CombustionSunita Deb, Lav Kumar Kaushik, Arun Kumar Mahalingam, Palanisamy Muthukumar · Chemical Engineering Transactions 81 · 2020

An IIT Guwahati team tested a cluster of three porous radiant burners against a conventional free-flame LPG burner at a 12.56 kW firing rate under BIS 14612. The cluster improved thermal efficiency by up to 19% at an equivalence ratio of 0.7 and cut CO and NOx. The limit: it is a commercial-scale burner; household stoves run at a fraction of that power, but the lesson for our problem holds, because a faster chai minute needs bigger and better burners, not more gas.

Read the paper (free)

How sensitive is the answer to the assumptions?

The verdict survives every reasonable change in the assumptions, because the grid gap is a factor of 7.6 and no recipe tweak closes it. The ingredient shares move a little; the power problem does not.

ChangeNew valueEffect
Population 1.46 billion instead of 1.40+4.3%Milk 90,200 t; induction power 2.16 TW
Stove efficiency 45% (old, dirty burner)LPG 5,100 tHousehold time rises to 6.4 minutes
Stove efficiency 70% (new stove)LPG 3,280 tHousehold time falls to 4.1 minutes
No boil-off (just heat to 100 °C)Useful heat 41.5 kJ per cupGrid minimum falls from 7.6 to 4.2 minutes
Milk-heavy cup, 100 ml milk1,44,000 t milk21% of a day's milk; still available

The model breaks in one place: it treats India as one kitchen. Real milk sits in dairies and fridges in uneven amounts. Punjab, Rajasthan and Haryana have some of the highest per-capita availability in the world while Manipur and Lakshadweep are far below the national 485 g, so some districts would run out of milk long before the national average says they should.

Verdict: possible with changes

The milk, tea, sugar and gas exist today. The single minute is impossible for a simple reason: \(P = E/t\) demands 2.07 TW on induction, 7.6 times India's record 270.82 GW peak, or an 8.4 kW burner in every kitchen. Widen the window to about five minutes, brew in family-sized pans on the LPG stoves India already has, and the national chai minute becomes a national chai five-minutes that the system can actually serve.

For the history of how tea became India's default drink in the first place, read how the Tea Board made India a chai country and why tea beats coffee in most of India. The milk side of this story starts with Operation Flood. If you want your own cup done properly, the Taste Lab has the science of brewing masala chai.

What if next?

Questions people ask

How much tea does India drink in a day?

About 3,200 tonnes of tea leaf, if you take the commonly cited per-capita figure of 840 g a year for 1.4 billion people. India is the world's second-largest tea producer and keeps roughly 80% of its output at home.

How much milk does India produce per day?

About 6.8 lakh tonnes. The government's Basic Animal Husbandry Statistics put 2024-25 production at 247.87 million tonnes, with per-capita availability of 485 g a day.

How much gas does it take to make one cup of chai?

Roughly 2.7 g of LPG for a 120 ml cup that is boiled for a while, assuming a 60% efficient stove. Heating alone takes about 41.5 kJ; boiling off 15 ml of water adds another 33.9 kJ.

Are paper cups safe for hot tea?

The IIT Kharagpur study found hot water in disposable paper cups picked up about 25,000 micro-sized plastic particles in 15 minutes. It did not measure health effects, so the risk is unquantified; glass, steel or a kulhar avoids the liner altogether.

Sources

  1. News On AIR: India retains top position in milk production (DAHD data) (2026). Source for 247 Mt milk and 485 g per day.
  2. Drishti IAS: India's tea industry (2025). Source for 840 g per-capita tea consumption and 80% domestic use.
  3. ChiniMandi: Sugar consumption likely to dip to 280 lakh tonnes in 2024-25 season, says ISMA (2025). Source for daily sugar use.
  4. Dairy News Today: India's increasing milk production and regional disparities in access (2025). Source for state-level differences.
  5. Inshorts (PPAC data): How much LPG did India produce and consume in the last 5 financial years (2026). Source for 31.3 Mt LPG consumption in 2024-25.
  6. Construction World: India's LPG Q1 sales rise 4.7% as customer base grows to 326.8 million (2024). Source for the customer count.
  7. BPCL presentation to PNGRB: Bharat Hi-Star PNG stove (2025). Source for 70% new LPG stove efficiency.
  8. Wikipedia: Heat of combustion. Source for propane and butane heating values.
  9. WION: India's peak power demand hits record for fourth straight day (2026). Source for 270.82 GW.
  10. Little J.D.C.: Little's Law as Viewed on Its 50th Anniversary, Operations Research (2011). Source for \(L = \lambda W\).
  11. News-Medical: IIT Kharagpur paper-cup microplastics study (Ranjan et al., Journal of Hazardous Materials) (2020). Source for 25,000 particles per cup.
  12. Deb S. et al.: Cluster porous radiant burner for LPG, Chemical Engineering Transactions 81 (2020). Source for 19% burner efficiency gain.
  13. Agrospectrum India: Tea prices cross ₹230/kg in June (2026)
  14. Power Line: When the Lights Went Off, POSOCO's management of the 5 April 2020 nine-minute event (2020). Source for the story: 31,089 MW drop, 85,799 MW minimum, hydro ramps and frequency range.
chaiLPGmilk productionTea Boardpeak power demandLittle's lawpaper cupsheat transfer
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of Whyblog.

Keep reading in Whyblog

From the other blogs