Motorcycle tyre size explained: reading 110/70 R17 54H

Every number on a sidewall is a measurement or a limit. Read them properly and you know the tyre's height, load, top speed, age, and what a bigger rear will do to your speedometer.

A Pirelli motorcycle front tyre wrapped in a tyre warmer before a Supersport race, showing tread and sidewall
Photo: Cjp24, CC BY-SA 4.0, via Wikimedia Commons

Motorcycle tyre size 110/70 R17 54H means a tyre about 110 mm wide, with a sidewall 70% of that width (77 mm), of radial construction, for a 17-inch rim, rated to carry 212 kg at a speed of up to 210 km/h. The overall diameter follows directly: 17 × 25.4 + 2 × 77 = 586 mm. Add the four-digit DOT date code and the tread wear indicator, and the sidewall tells you almost everything you need before buying or riding on a tyre.

Key takeaways
  • 110/70 R17 54H: 110 mm wide, 77 mm sidewall, radial, 17-inch rim, 212 kg, 210 km/h.
  • Diameter = rim × 25.4 + 2 × sidewall, so a 110/70-17 is about 586 mm tall.
  • The last four DOT digits are the week and year: 2224 means week 22 of 2024.
  • A 130/70 to 140/70 swap on an NS200 rear is 2.3% taller: taller gearing and a lower speedo reading.
  • A speedometer may over-read by 10% + 4 km/h but never under-read (UN Regulation 39).

Indian riders mostly read the sidewall when they want a fatter rear tyre. That is a fair question, because changing size changes ride height, gearing, the speedometer reading and sometimes ABS behaviour.

This post decodes every marking, puts the stock and popular upgrade sizes side by side, and gives you a calculator for the diameter and speedometer change. The worked example is my own 2017 Pulsar NS200, which now runs Apollo Alpha H1 radials in 110/70 ZR17 front and 140/70 ZR17 rear instead of the stock 100/80-17 and 130/70-17.

586 mmoverall diameter of a 110/70 R17 tyre
212 kgload per tyre at load index 54
210 km/hspeed rating H
4 digitsDOT date code: week, then year
The story

On 9 August 2000, Bridgestone/Firestone announced a voluntary recall of 14.4 million 15-inch tyres, about 6.5 million of them still thought to be in use (Congressional Research Service). They had been linked to tread separations, mostly on Ford Explorer SUVs; by September 2001 NHTSA's count stood at 271 deaths in the US.

Whether your tyre was affected was written on its sidewall. Every P235/75R15 Firestone ATX and ATX II made since 1991 was in. The Wilderness AT in the same size was recalled only if it came from the Decatur, Illinois plant, since 1996, and those tyres carried the plant code VD. Owners had to read a size, a model name and two letters of a code most had never looked at. Congress held hearings that September, and the TREAD Act was signed into law on 1 November 2000.

Congressional Research Service: Firestone Tire Recall, NHTSA, Industry and Congressional Responses (RL30710)

What does each part of a motorcycle tyre size mean?

A metric motorcycle tyre size reads as width, aspect ratio, construction, rim diameter, then load index and speed symbol. Take 110/70 R17 54H:

MarkingMeaningIn this example
110Nominal section width in millimetresAbout 110 mm across the widest point, on the design rim
/70Aspect ratio: sidewall height as a % of width0.70 × 110 = 77 mm sidewall
RConstructionRadial. A dash or no letter means cross-ply (bias); B means bias-belted
17Rim diameter in inchesFits a 17-inch rim (431.8 mm)
54Load index212 kg per tyre at the specified pressure
HSpeed symbolUp to 210 km/h at the rated load
M/CMotorcycle fitmentBuilt for motorcycle rims and loads
TL / TTTubeless / tube typeTT tyres must run with an inner tube

Two sizes on the same bike can say different things in different places. Bajaj's BS6 NS200 manual lists the stock tyres as 100/80-17 52P and 130/70-17 62P, both tubeless. The dash means bias construction. My replacement Apollos are marked ZR17, where the Z inside the size is the older way of flagging a tyre rated above 240 km/h. Some sizes are printed as 110/70 ZR17 M/C (54W), with both the Z and the modern load-and-speed code.

Reading 110/70 R17 as dimensions Sidewall = 70% of 110 = 77 mm Rim 17 in = 431.8 mm Overall diameter about 586 mm Width 110 mm D = rim × 25.4 + 2 × width × aspect / 100 431.8 + 2 × 77 = 585.8 mm
The nominal diameter comes straight from the size code. Real tyres vary by a few millimetres with brand, rim width and wear.

What do the load index and speed rating numbers mean?

The load index is a code for the maximum weight one tyre can carry at its specified pressure, and the speed symbol is the maximum sustained speed at that load. Both are fixed by the tyre code tables used worldwide, so a 62 is 265 kg on every brand.

The table pairs two separate scales row by row for space; read the left two columns together and the right two together.

Load indexkg per tyreSpeed symbolMax speed
52200L120 km/h
54212P150 km/h
58236S180 km/h
62265T190 km/h
66300H210 km/h
70335V240 km/h
73365W270 km/h

Put real bikes against that table. The stock NS200 tyres are rated 52P front and 62P rear: 200 kg and 265 kg, at up to 150 km/h. Wikipedia lists the NS200's top speed as 140 km/h, so the P rating clears it with a small margin.

The KTM 390 Adventure X uses a 100/90 R19 54T front and a 130/80 R17 70T rear, so its rear tyre is rated for 335 kg because it is built to carry luggage, a pillion and off-road impacts. A replacement tyre should match or beat both numbers for your bike; a lower load index on a loaded tourer is the more common mistake than a lower speed rating.

Read the sidewall: a labelled close-up

What the sidewall says110/70 ZR17 M/C (54W) TLDOT ···· 2224TWI1234561 110/70: 110 mm wide, sidewall 77 mm2 ZR17: above 240 km/h, radial, 17-inch rim3 (54W): 212 kg per tyre, up to 270 km/h4 TL: tubeless; TT would need a tube5 DOT 2224: made in week 22 of 20246 TWI: wear bar sits in the groove below itPlant code: the first characters of the DOT serial,the marking that sorted recalled tyres in 2000.
A sidewall marked the way the ZR17 sizes in this post are printed. Load index, speed symbol and date code come from the international tyre code tables; the DOT oval may be on only one side of the tyre.
A Royal Enfield Himalayan 450 adventure motorcycle on display, with a tall 21-inch front wheel
The Himalayan 450 pairs a 90/90-21 front with a 140/80 R17 rear: the tall, narrow front rolls over rocks, the 17-inch radial rear carries the load.Photo: Rouv1505, CC BY-SA 4.0, via Wikimedia Commons

How do you find a tyre's age from the DOT code?

The last four digits of the DOT code are the manufacturing date: the first two are the week and the last two are the year, so 2224 means the 22nd week of 2024. Tyres made before 2000 used a three-digit code. The code sits in a small oval on one side of the sidewall, so you may have to look at both sides.

Age matters because rubber oxidises whether or not the tyre is ridden. A tyre sitting in a dealer's store for three years is three years older than its tread suggests. The checks for wear, cracking and pressure are in how to check motorcycle tyre wear and age.

NHTSA Tire Aging Test Development Project, Phase 2: Evaluation of Laboratory Tire Aging MethodsEvans and MacIsaac · US National Highway Traffic Safety Administration, report DOT HS 811 885 · 2014

Six tyre models that had been collected after service in Phoenix, Arizona were compared with new tyres aged in the lab by roadwheel testing and by oven ageing. Properties moved in the same direction with time in service and with lab ageing, consistent with thermo-oxidative ageing. The longest roadwheel tests matched about 1 to 3 years of Phoenix service; the harshest oven ageing matched about 3 to over 6 years. After 6 weeks in the oven, oxygen in the inflation gas fell from about 45% to 35%, so the method needed periodic re-inflation. The limit: these were car and light-truck tyres in a hot desert, not motorcycle tyres in Indian conditions, but the chemistry of rubber ageing is the same.

Read the report summary (free)
People Do Not Identify Tire Aging as a Safety HazardCowley, Kim and Wogalter · Proceedings of the Human Factors and Ergonomics Society Annual Meeting · 2006

The researchers asked 225 people (101 non-student adults and 124 college students) to list everything they thought could cause a tyre to fail. Most named at least one cause, but only 4.0% mentioned ageing. The authors argue that a date code alone does not warn people, and that labels and warnings should spell out what age means. The limit: a US sample of car users, so it measures awareness, not crash risk. It is the reason this post spends a section on four small digits.

Read the paper (free)

What happens when you fit a wider rear tyre?

A wider tyre in the same aspect ratio is also taller, because the sidewall is a percentage of the width. Going from 130/70-17 to 140/70-17 on the NS200 rear adds 14 mm to the diameter, from about 614 mm to 628 mm, a 2.3% increase. That small change has four effects:

Calculated in this post from the stock 130/70-17 rear size in Bajaj's manual, the 140/70-17 replacement size and the tyre-code diameter formula.

  • Gearing gets taller. Each wheel turn covers 2.3% more road, which is the same as a slightly smaller rear sprocket. The full maths is in the sprocket gearing calculator.
  • The speedometer reads lower than before if it takes its signal from that wheel. With 2.3% more circumference, an indicated 100 km/h becomes about 102 km/h true. (Calculated here from the tyre-code diameter formula and the stock 130/70-17 size.)
  • Ride height rises by half the diameter change, 7 mm at the axle, which slightly steepens steering geometry; see rake and trail with real bike numbers.
  • Fit and rim width. A tyre is designed for a range of rim widths. On a narrow rim a wide tyre is pinched into a rounder, taller profile. xBhp members advising an RS200 owner in 2018 suggested a 140/70 rather than a 150/60 for this reason, saying the 150 would be a tight fit on the stock rim.
Overall diameter of common motorcycle tyre sizes
See the data as a table
Nominal diameter (mm)
110/70-17585.8
100/80-17591.8
140/60-17599.8
150/60-17611.8
130/70-17613.8
140/70-17627.8
130/80-17639.8
140/80-17655.8
100/90-19662.6
90/90-21695.4

Source: Computed from the ETRTO-style size formula: rim × 25.4 + 2 × width × aspect ÷ 100 (tyre code convention) · Nominal values. Real diameters vary with brand, carcass, rim width, pressure and wear.

A 150/60 is wider than a 130/70 but almost exactly as tall: 612 mm against 614 mm.

The chart shows why a 150/60 is a popular rear upgrade on 17-inch bikes: it is wider but almost exactly as tall as a 130/70 (612 mm vs 614 mm), so gearing and the speedometer barely change. A 140/70, as fitted on my NS200, is the taller choice. On the front, the 110/70 I run is 6 mm shorter in diameter than the stock 100/80, a 1% drop, which nudges the front down slightly.

Tyre size change: diameter and speedometer

How accurate is a motorcycle speedometer anyway?

Under UN Regulation 39, the European type-approval rule, a speedometer may never show less than the true speed and may over-read by at most 10% of true speed plus 4 km/h. At a true 100 km/h, a legal speedometer can therefore show anywhere from 100 to 114 km/h. Makers calibrate on the high side so that tyre wear, which shrinks the diameter, never pushes the reading below true speed.

That is why a slightly taller tyre often makes a speedometer more honest rather than less. A 2.3% taller rear removes part of a built-in over-read. Check against a GPS app on a straight, flat road at steady speed before deciding whether you have a problem. Tyre pressure also changes the rolling radius slightly; the case for and against nitrogen fills is in nitrogen in bike tyres.

Close-up of a motorcycle speedometer dial
A speedometer is allowed to over-read but never under-read, so a slightly taller tyre often brings it closer to true speed.Photo: Shixart1985, CC BY 2.0, via Wikimedia Commons

Radial or bias, tubeless or tube type: what should you buy?

Radial tyres have their carcass cords running straight across from bead to bead, with a belt under the tread; bias tyres have cords crossing at an angle in layers. Radials run cooler and keep a more consistent footprint at speed and at lean, which is why most sports and touring tyres are radial. Bias tyres have stiffer sidewalls for a given cost and suit lighter, slower bikes and many 21-inch off-road fronts, like the 90/90-21 on the Himalayan 450.

  • Tubeless (TL) tyres seal against the rim and lose air slowly when punctured, so you can often ride to a repair or plug them at the roadside. They need a tubeless-type rim, usually alloy or a sealed spoke design.
  • Tube type (TT) tyres need an inner tube, deflate fast when punctured and must be removed for repair. They are common on spoked off-road rims.
  • Matching. Do not mix radial and bias between front and rear unless the bike maker or tyre maker approves the combination, because the two behave differently at lean.

Rubber that has sat in hot sun also hardens, which is why the new review below matters for riders who buy tyres and leave a bike parked for months.

Tire aging: A state-of-the-art reviewStabile, Mastinu, Gobbi and Bardini (Politecnico di Milano) · Engineering Science and Technology, an International Journal · 2025

The authors review how oxidation, heat, ultraviolet light, ozone and humidity each degrade tyre rubber, and how labs try to reproduce that with accelerated ageing in ovens and climate chambers. Across the literature, ageing mainly cuts elongation at break and tensile strength while raising stiffness (modulus) and hardness, which in a tyre means more risk of cracking and less grip. The limit they flag: most studies use small rubber samples rather than whole tyres, and the combined effect of several ageing factors acting together is barely studied.

Read the paper (free)

Where is the tread wear indicator on a motorcycle tyre?

The tread wear indicator (TWI) is a small raised bar moulded across the bottom of a tread groove; a triangle or "TWI" mark on the shoulder shows where to look. When the tread wears down flush with that bar, the tyre has reached the minimum depth its maker allows and should be replaced. Check the bars in two or three places around the tyre, because motorcycle tyres square off in the centre on highway use long before the shoulders wear.

Stacks of Pirelli superbike rear tyres: smooth racing slicks on the left and deeply grooved rain tyres on the right
Slicks (left) have no grooves at all; rain tyres (right) have deep ones to clear water. Road tyres sit in between, and their grooves carry the wear bars that tell you when to replace them.Photo: Cjp24, CC BY-SA 4.0, via Wikimedia Commons

Questions people ask

Can I fit a 140/70 rear in place of a 130/70 on a Pulsar NS200?

Many owners do, including me. It is 14 mm taller and 10 mm wider in nominal terms, so check chain and swingarm clearance and expect gearing about 2.3% taller. An xBhp thread on the RS200 recommended 140/70 over 150/60 for fit on the stock rim.

Calculated in this post from the stock 130/70-17 rear size in Bajaj's manual, the 140/70-17 replacement size and the tyre-code diameter formula.

Does a wider rear tyre reduce mileage?

Slightly, if at all. A wider tyre is heavier and has a bigger contact patch, but the taller diameter also lowers engine rpm at a given speed. An experienced xBhp member put the effect at a negligible 2 to 4 km/l at worst for a 150/60 swap; I found no controlled tests for Indian bikes.

What does ZR mean on a motorcycle tyre?

ZR is an older speed marking inside the size, meaning the tyre is rated above 240 km/h. Modern tyres often add a W (270 km/h) or Y (300 km/h) symbol, sometimes in brackets, after the load index.

How old is too old for a motorcycle tyre?

There is no single legal limit in India. Check the DOT date when you buy, avoid tyres that have already spent years in storage, and inspect older tyres for cracks in the grooves and sidewalls. Cracking and hardening, not only tread depth, are the signs that a tyre has aged out.

Why is my speedometer showing more than my GPS?

Because it is allowed to. UN Regulation 39 lets a speedometer over-read by up to 10% plus 4 km/h but never under-read, so most bikes show a few km/h more than GPS at highway speeds.

Sources

  1. Wikipedia: Tire code (load index, speed symbols, DOT date code, construction letters)
  2. Bajaj Auto: Pulsar NS200 BS VI owner's manual (tyre sizes and pressures) (2023)
  3. Wikipedia: Bajaj Pulsar NS200 (top speed)
  4. Motorcyclespecs: KTM 390 Adventure X (2025), tyre sizes and load ratings (2025)
  5. Royal Enfield: Himalayan 450 technical specifications (2024)
  6. UNECE Regulation No. 39: speedometer accuracy requirements (EUR-Lex) (2010)
  7. Evans and MacIsaac: NHTSA Tire Aging Test Development Project Phase 2, DOT HS 811 885 (2014)
  8. Cowley, Kim and Wogalter: People Do Not Identify Tire Aging as a Safety Hazard, HFES (2006)
  9. Stabile et al.: Tire aging, a state-of-the-art review, JESTCH (2025)
  10. xBhp forum: RS 200 tyre change (2018)
  11. Autocar Professional: BKT enters India's on-highway tyre market (2026)
  12. TERI: Scoping Study on India's Tyre Industry (2026)
  13. Congressional Research Service: Firestone Tire Recall, NHTSA, Industry and Congressional Responses, RL30710 (2001)
  14. Daily Leader: Recall keeping local tire dealers busy (Wilderness AT tyres with the VD code) (2000)
  15. Wikipedia: Firestone and Ford tire controversy (NHTSA death count, TREAD Act dates)
tyrestyre sizeload indexspeed ratingDOT coderadial tyrespeedometer errortubeless
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of RoadHook Machines.

Keep reading in RoadHook Machines

From the other blogs