The first motorcycle in the world: Daimler's 1885 Reitwagen

Two steam bikes ran before it and it had four wheels touching the ground. Here is why the Reitwagen still gets the title, and how its layout led to the bike you ride.

The Daimler Reitwagen of 1885, a wooden-framed two-wheeler with a tall upright engine under the seat, displayed at the Mercedes-Benz Museum
Photo: Wladyslaw, CC BY-SA 2.0 de, via Wikimedia Commons

The first motorcycle in the world, by the standard definition of a two-wheeler driven by an internal combustion engine, is the Daimler Reitwagen, built by Gottlieb Daimler and Wilhelm Maybach in Cannstatt, Germany, and first ridden in November 1885. Its 264 cc single made about 0.5 hp at 600 rpm. Two steam-powered two-wheelers, Sylvester Roper's in Massachusetts and the Michaux-Perreaux in Paris, ran earlier, between 1867 and 1869, which is why the title is still argued over.

Key takeaways
  • 18 November 1885: 17-year-old Paul Daimler makes the first Reitwagen ride, Cannstatt to Untertürkheim.
  • 264 cc, 0.5 hp at 600 rpm: the first petrol engine in a two-wheeler, about 11–12 km/h flat out.
  • 1867–69: the Roper and Michaux-Perreaux steam velocipedes ran first, so "first" depends on the definition.
  • 1894: the Hildebrand & Wolfmüller became the first motorcycle built in series and sold, about 2,000 made.
  • 1901: the New Werner put the engine low between the wheels, the layout every bike still uses.

The argument is not pedantry. It is about what a motorcycle is. If a motorcycle is any self-propelled two-wheeler, steam got there first. If it is a two-wheeler with the kind of engine that went on to win, a petrol-burning four-stroke, Daimler got there first, and it did not even mean to build a motorcycle.

The Reitwagen was a test bed for an engine intended for carriages and boats.

This post covers four things:

  • the contenders, with dates and numbers;
  • why the Reitwagen is usually credited;
  • the line through the first bike you could buy (Hildebrand & Wolfmüller, 1894) and the layout that stuck (the New Werner, 1901);
  • how far that line has travelled in 140 years.
18 Nov 1885first Reitwagen ride, Cannstatt to Untertürkheim (most accounts)
264 ccsingle-cylinder four-stroke, 58 × 100 mm
0.5 hpat 600 rpm, about 11-12 km/h top speed
1867-69dates claimed for the two steam velocipedes

Who built the first motorcycle in the world?

Gottlieb Daimler and Wilhelm Maybach built the Reitwagen ("riding carriage") in 1885 in a workshop in Cannstatt, now part of Stuttgart, and it is the machine most reference works call the first motorcycle. Daimler filed the patent on 29 August 1885, and German patent DE 36423 for a vehicle with a gas or petroleum engine was issued later that year.

Daimler and Maybach began their engine work in a garden shed in Cannstatt in 1882, aiming for a small, fast-running petrol engine. Their single-cylinder Standuhr or "grandfather clock" engine, patented on 3 April 1885 (DE 34926), ran at about 600 rpm when most gas engines idled at a fraction of that.

They needed something to put it in. A two-wheeler was the lightest test vehicle they could make.

The story

On 18 November 1885, according to Daimler company records summarised on Wikipedia, Gottlieb Daimler's 17-year-old son Paul took the Reitwagen out of Cannstatt and rode it to Untertürkheim, a run usually given as 5 to 12 km. The engine under him made half a horsepower.

The ignition was a hot tube: a platinum tube kept glowing by an open flame, mounted directly under the seat. On that first excursion, the seat caught fire. The first ride on the first petrol motorcycle ended, in other words, with the rider sitting on the first motorcycle fire.

A 2025 German anniversary article names a different son, Adolf, as the rider; most English sources, and the Wikipedia account, say Paul.

Wikipedia: Daimler Reitwagen, first ride and specifications
Coloured patent drawing of the Daimler Reitwagen from German patent 36423, showing side and top views of the wooden frame and engine
Views of the Reitwagen from the 1885 German patent 36423. The engine sits upright in the middle of a wooden frame, with outrigger wheels on each side.Photo: Gottlieb Daimler, Public domain, via Wikimedia Commons

What were the Reitwagen's specifications?

The Reitwagen used a 264 cc air-cooled single-cylinder four-stroke with a 58 mm bore and 100 mm stroke, producing 0.37 kW (0.5 hp) at 600 rpm and about 6.7 Nm of torque. It weighed about 90 kg dry and reached roughly 11 to 12 km/h.

ItemReitwagen (1885)
Engine264 cc single, four-stroke (Otto cycle), air-cooled
Bore × stroke58 × 100 mm
Output0.37 kW (0.5 hp) at 600 rpm; 6.7 Nm
IgnitionHot tube: a platinum tube kept red-hot by an open flame
Fuel systemFloat carburettor; suction-opened intake valve
DriveBelt, single speed (1885); two speeds by winter 1885-86
Frame and wheelsWooden beam frame; wooden wheels with iron tyres
Suspension and brakesNone; a shoe brake at the rear
Steering geometry0° rake, 0 mm trail
Stability aidTwo spring-loaded outrigger wheels
Weight and speedAbout 90 kg dry; 11-12 km/h

Two details worth a second look

  • A flame on board. Hot-tube ignition meant an open flame under the rider, which is why the seat caught fire.
  • Zero rake and zero trail. The bike had none of the self-centring steering that makes a modern motorcycle stable; I explain what rake and trail do in chassis geometry: rake and trail. That is why it needed outrigger wheels, and why critics such as David Burgess-Wise called it a crude makeshift.

Were there motorcycles before 1885?

Yes, if steam counts. Two steam-powered two-wheelers ran in the late 1860s: Sylvester Roper's steam velocipede in Massachusetts (dated between 1867 and 1869) and the Michaux-Perreaux steam velocipede in Paris (built 1867 to 1871, patented by Louis-Guillaume Perreaux in December 1869).

Roper's steam velocipede

Roper's machine is the oldest surviving American motorcycle and sits in the Smithsonian's National Museum of American History. In his 1998 Cycle World essay, Allan Girdler dated it to 1868 or 1869 from newspaper reports of fairground demonstrations. Its parts:

  • a twin-cylinder steam engine driving cranks on the rear wheel;
  • a boiler slung between the wheels;
  • 34-inch wooden wheels with iron tyres;
  • a twist-grip that opened the throttle one way and applied a brake the other.

The Michaux-Perreaux

The Michaux-Perreaux was a Michaux pedal vélocipède fitted with a small alcohol-fired steam engine of 22 × 80 mm bore and stroke, rated at 1 to 2 hp. The whole machine weighed about 87 kg. Only one was built; it belongs to the Musée de l'Île-de-France at Sceaux.

The Michaux-Perreaux steam velocipede of 1869, a wooden bicycle with a small steam boiler and engine mounted under the seat, on display in a museum
The Michaux-Perreaux steam velocipede, shown at the Guggenheim's Art of the Motorcycle exhibition. It is one of three machines with a claim to be the first motorcycle.Photo: ROGERIOMACHADO from Brazil, CC BY-SA 2.0, via Wikimedia Commons
MachineYearPower sourceOutputClaim
Roper steam velocipede1867-69Coal-fired steam, twin cylindernot recordedEarliest self-propelled two-wheeler that survives
Michaux-Perreaux1867-71Alcohol-fired steam, single cylinder1-2 hpPatented (Dec 1869); one built
Copeland steam bicycle1884Steamnot recordedSmall production attempt in the USA
Daimler Reitwagen1885Petrol, 264 cc four-stroke0.5 hpFirst internal-combustion two-wheeler
Hildebrand & Wolfmüller1894Petrol, 1,489 cc twin, water-cooled2.5 hp at 240 rpmFirst motorcycle built in series and sold
New Werner1901Petrol, 217 cc single1.5 hpEngine low in the frame: the layout that stuck
1867–69Roper steam velocipede (USA)1869Michaux-Perreaux patent (Paris)1884Copeland steam bicycle1885Daimler Reitwagen, first petroltwo-wheeler (ridden 18 Nov)1886Benz Motorwagen patent (a car)1894Hildebrand & Wolfmüller, first sold1897Werner Motocyclette, engine up front1901New Werner, engine low: the modern layout1969Honda CB750 Four, 67 hp target
Steam came first, petrol won. Accented dots mark the two machines that matter most: the first petrol two-wheeler and the first with today's layout. The time axis is not to scale.

Why does the Reitwagen get the title over steam?

The Reitwagen gets the title because the definition most dictionaries and historians use requires an internal combustion engine, and because its engine type is the one that won. The Oxford English Dictionary's definition of a motorcycle is built around an internal combustion engine; by that test, steam machines are steam velocipedes, not motorcycles.

The case for Daimler

Cycle World's technical editor Kevin Cameron put the second reason most sharply: history follows what succeeded. Steam two-wheelers were a dead end:

  • a coal or alcohol boiler needs time to raise pressure;
  • it adds weight;
  • it has to be fed.

The light, fast-running petrol engine Daimler and Maybach built went into cars, boats and, within a decade, every motorcycle made.

The case for Roper

Girdler argued the opposite case: Roper's machine fits a modern definition of a motorcycle better than the Reitwagen, since it balanced on two wheels, had a twist-grip and a front brake, and was ridden in public for years. He also conceded that Roper's ideas had little influence on what came after.

Both positions are defensible. What is not defensible is calling the Reitwagen the first two-wheeled vehicle with an engine.

What was the first motorcycle you could actually buy?

The Hildebrand & Wolfmüller of 1894, built in Munich, was the first motorcycle produced in series and sold to the public, and the first to be called a Motorrad. About 2,000 were made between 1894 and 1897.

It was nothing like a modern bike. Its 1,489 cc water-cooled parallel twin (90 × 117 mm) sat low in the frame and drove the rear wheel directly through connecting rods, like a steam locomotive, so there was no clutch or gearbox.

It made 2.5 hp at just 240 rpm and could reach about 45 km/h. It was also built under licence in Paris by Duncan & Superbie. Production ended in 1897; the price was high for the time.

A Hildebrand and Wolfmüller motorcycle of 1894 with a long low frame, large spoked wheels and a water tank over the rear wheel, in a museum
A Hildebrand & Wolfmüller of 1894 at the National Technical Museum in Prague. The curved tank over the rear wheel holds cooling water for the 1,489 cc twin.Photo: Addvisor, CC BY-SA 4.0, via Wikimedia Commons

How did those early layouts become today's motorcycle?

The layout every motorcycle uses today, with the engine low in the frame between the wheels where a bicycle's pedals would be, came from the Werner brothers' New Werner, shown at the Paris Cycle and Motor Show in 1901. Their earlier 1897 Motocyclette had mounted the engine high above the front wheel, which made it top-heavy and hard to steer.

1885 Reitwagenupright engine mid-frame,outrigger wheels (dashed)1897 Motocycletteengine high over the frontwheel: top-heavy1901 New Wernerengine low between thewheels: the layout that stuck
Where the engine sits. The accent block is the engine. Moving it low and central, where a bicycle's pedals are, lowered the centre of mass and settled the shape of the motorcycle. Sketches, not to scale.

The New Werner's 217 cc single made 1.5 hp, less than the Hildebrand & Wolfmüller, but its low centre of mass and chain or belt drive to the rear wheel were right. Kevin Cameron has called it the most influential motorcycle of all time.

Within a few years almost every maker copied it, and Indian riders met the result when British singles such as the Royal Enfield Bullet arrived; that line is in the Royal Enfield Bullet history and the wider story in the history of motorcycles in India.

From there the curve is steep. The chart below uses manufacturer or period-test figures for six landmark machines.

Peak output of landmark motorcycles, 1885-1969
See the data as a table
Peak output (hp)
Daimler Reitwagen (1885)0.5
New Werner (1901)1.5
Hildebrand & Wolfmüller (1894)2.5
Brough Superior SS100, JAP engine (late 1920s)50
Vincent Black Shadow (1948)55
Honda Dream CB750 Four (1969)67

Source: Daimler Reitwagen, New Werner, Hildebrand & Wolfmüller, Brough Superior SS100 and Vincent Black Shadow records (Wikipedia, from period sources); Honda heritage for the CB750 · Mixed units: hp, bhp and PS differ by under 2%. The Honda figure is its planned 67 hp output.

Two jumps stand out

  1. 1901 to the 1920s. V-twins of about 1,000 cc, like the Brough Superior SS100 that George Brough guaranteed would do 100 mph, took output from single digits to about 50 bhp.
  2. 1969. Honda's Dream CB750 Four put a 750 cc overhead-cam four with an electric starter and a front disc brake on sale in the US at $1,495, when big bikes cost $2,800 to $4,000. Honda's own history says the target was 67 hp, one more than Harley-Davidson's 1,300 cc engine.

The engine choices that followed, singles versus twins versus fours, are in single vs twin cylinder engines, and what horsepower actually measures is in power and torque explained.

A 1969 Honda CB750 Four with four chrome exhaust pipes, a red tank and a front disc brake, at a classic vehicle show
A 1969 Honda CB750 Four. Eighty-four years after the Reitwagen, it made more than a hundred times the power with electric start, four cylinders and a disc brake.Photo: SG2012, CC BY 2.0, via Wikimedia Commons

How much has the motorcycle changed since 1885?

The basic recipe of a petrol four-stroke driving the rear wheel is unchanged since the Reitwagen, but specific output has risen roughly a hundredfold. The Reitwagen made about 1.9 hp per litre. A modern Indian-built single such as the KTM 390 Duke makes 46 hp from 399 cc, about 115 hp per litre, according to Bike India's 2024 specification comparison.

The Reitwagen made about 1.9 hp per litre. A KTM 390 Duke makes about 115.

Three changes did most of that work:

  • Engine speed: 600 rpm then, 9,000 now.
  • Compression and fuel quality.
  • Precise fuel and spark control. Daimler's float carburettor and hot tube gave way to magnetos, then electronic ignition, then fuel injection; the last step is explained in fuel injection vs carburettor.

The weight problem never went away, which is why power-to-weight, not power alone, is the number I use to rank modern bikes. If you want the wider machine-age context for all this, the Yantra world page collects the engineering posts on this site.

What do the primary sources say?

First Fired, First ForgottenAllan Girdler · Cycle World, vol. 37, no. 2 · February 1998

A historian's case that Sylvester Roper, not Daimler, built the first motorcycle. Girdler works from the surviving machine in the Smithsonian, contemporary newspaper reports of its fair and circus demonstrations from 1869, and the ownership chain from the Roper family to the museum.

He dates the machine to 1868 or 1869 and describes its steam engine, 34-inch wooden wheels, front brake and twist-grip control. The limit, which he states: the evidence is circumstantial and deductive, the machine has never been run in modern times, and Roper's design had little influence on later motorcycles.

Read the article (free)
The Dream CB750 FOUR / 1969Honda Motor Co. · Honda Heritage, company archive

Honda's account of how its first big production motorcycle was specified and built. It records development starting in February 1968, a planned output of 67 hp from 750 cc and four cylinders, a US retail price of $1,495 against $2,800 to $4,000 for rival large bikes, and production forecasts that rose from 1,500 a year to 3,000 a month.

It also explains why the disc brake was adopted late in the programme. The limit: it is a manufacturer history, so it reports targets and Honda's view of events, not independent test results.

Read the archive page (free)

Questions people ask

Which was the first motorcycle in the world?

The Daimler Reitwagen, built in 1885 by Gottlieb Daimler and Wilhelm Maybach in Germany, is usually called the first motorcycle because it was the first two-wheeler powered by an internal combustion engine. Steam velocipedes by Sylvester Roper and Pierre Michaux with Louis-Guillaume Perreaux ran earlier, around 1867-69.

Who invented the motorcycle, Daimler or Benz?

Daimler. Karl Benz built a car, the Patent-Motorwagen, and filed its patent (DRP 37435) on 29 January 1886. Daimler and Maybach's Reitwagen had already run in November 1885. The two men worked separately, Benz in Mannheim and Daimler in Cannstatt.

Was the Reitwagen a two-wheeler?

It ran on two main wheels in line, but it had two spring-loaded outrigger wheels to keep it upright, because its zero-rake steering gave it no natural stability. That is the main reason some historians refuse it the title.

How fast was the first motorcycle?

About 11 to 12 km/h. Its 264 cc engine made 0.5 hp at 600 rpm, and the machine weighed about 90 kg dry.

Does the original Reitwagen still exist?

No. The original was destroyed in the 1903 fire at the Daimler works in Cannstatt. All surviving Reitwagens are replicas, including the running one Mercedes-Benz rode for the 140th anniversary in August 2025.

Sources

  1. Wikipedia: Daimler Reitwagen, with specifications and references to Daimler patents DE 34926 and DE 36423 (accessed Nov 2026; source for the first-ride story)
  2. MB Passion: Der Daimler Reitwagen von 1885 feiert 140. Geburtstag (27 Aug 2025)
  3. Allan Girdler, Cycle World: First Fired, First Forgotten (Feb 1998)
  4. Wikipedia: Roper steam velocipede, citing Smithsonian records (accessed Nov 2026)
  5. Wikipedia: Michaux-Perreaux steam velocipede (accessed Nov 2026)
  6. Wikipedia: Hildebrand & Wolfmüller (accessed Nov 2026)
  7. Wikipedia: New Werner (accessed Nov 2026)
  8. Wikipedia: Brough Superior SS100 (accessed Nov 2026)
  9. Wikipedia: Vincent Black Shadow (accessed Nov 2026)
  10. Honda Heritage: The Dream CB750 FOUR / 1969
  11. Honda: CB Stories, 1969
  12. Wikipedia: Benz Patent-Motorwagen (accessed Nov 2026)
  13. Bike India: Spec comparo, Bajaj Pulsar NS400Z vs rivals (11 Jun 2024)
Daimler ReitwagenGottlieb DaimlerWilhelm MaybachRoper steam velocipedeMichaux-PerreauxHildebrand & WolfmüllerNew WernerHonda CB750
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of RoadHook Machines.

Keep reading in RoadHook Machines

From the other blogs