What if you cooked biryani with a lightning bolt? The physics

A lightning flash carries about a billion joules; a large handi of biryani needs about 2.8 million. The catch is that the bolt delivers it in under a millisecond, mostly to the air, and rice needs 20 minutes.

A bright lightning bolt striking down from a dark storm sky
Photo: Ayorinde Ogundele, CC BY-SA 4.0, via Wikimedia Commons

A lightning flash dissipates roughly a billion joules, several hundred times the 2.8 million joules a large handi of biryani needs, yet a typical bolt would leave the rice raw. Most of the energy heats the air along a kilometres-long channel, a steel pot would carry the current around the food like a Faraday cage, and even through a clay handi a typical first stroke deposits only about 0.2 MJ, warming the biryani by about 6°C in a fraction of a millisecond.

Key takeaways
  • ~10⁹ J in a typical flash against 2.8 MJ for a big handi: energy is not the problem.
  • 0.2 MJ is all a median first stroke deposits through a clay handi, a 6°C rise.
  • About 3 J reaches food in a steel pot, which acts like a Faraday cage.
  • 15–23 minutes near 100°C is what rice needs; a stroke lasts about 100 µs.
  • A rare positive stroke plus a sealed dum could, in principle, cook it.

Rice needs 15 to 23 minutes near 100°C to absorb water and gelatinise, so a strike can at best start the job; only a rare, heavy positive stroke followed by a sealed dum could finish it.

The angle of this question is wonderful because both halves are true: a lightning bolt has more than enough energy to cook a feast, and it is almost useless for cooking. The difference lies in where the energy goes and how fast it arrives. I'll solve it in four steps:

  1. the energy in a flash;
  2. how much of it can enter a pot;
  3. what that does to the biryani;
  4. whether the rice can cook in the time available.
~10⁹ Jenergy dissipated by a typical four-stroke ground flash
2.8 MJheat to take a 10.6 kg handi of biryani from 25°C to 100°C
0.2 MJwhat a median first stroke deposits through a clay handi (estimate)
15–23 minminimum time rice needs in boiling water

How much energy is in a lightning bolt?

About 5.5 × 10⁸ J for a single stepped-leader and return-stroke sequence and about 9.5 × 10⁸ J for a typical four-stroke ground flash, according to Vernon Cooray's energy budget for lightning.

Anatomy of a strike

A cloud-to-ground flash starts with a faint stepped leader that inches down from the cloud, then a brilliant return stroke races back up the ionised path carrying tens of kiloamperes. CIGRÉ's engineering summary gives median values for a first negative return stroke of:

  • 30 kA peak current;
  • 5.5 µs to peak and 75 µs to fall to half;
  • 5.2 C of charge.

The air in the channel is heated to about 50,000°F, roughly 28,000°C, which the US National Weather Service puts at about five times the temperature of the Sun's surface.

The story

Benjamin Franklin had already roasted a turkey killed by electric shock at an "electrical barbecue" in the summer of 1749. On Christmas Day 1750, Benjamin Franklin wrote that two nights earlier he had set out to kill a turkey for dinner with a shock from two large glass jars, Leyden jars he said held as much charge as forty ordinary phials. In front of company, he touched the wrong wire and took the whole discharge through his own arms and body.

The guests saw a great flash and heard a loud crack; Franklin, stunned, noticed neither. He described a violent shaking, numbness that faded quickly and soreness that lasted days. He held that turkeys killed this way ate unusually tender. His jars held a tiny fraction of a lightning stroke's energy, which is the point of this post: even a vast bolt delivers its heat in the wrong place and at the wrong speed for dinner.

APS News: December 23, 1750: Ben Franklin attempts to electrocute a turkey (Dec 2006)
Energy dissipation in lightning flashesCooray V · Journal of Geophysical Research 102(D18) · 1997

Cooray built a physical model of how charge on the leader and in the cloud is neutralised and computed where the energy goes. A stepped leader and return stroke neutralising 5 C dissipates about 5.5 × 10⁸ J (about 3.5 × 10⁸ J in the return stroke); a dart leader and subsequent stroke neutralising 1 C dissipates about 1.2 × 10⁸ J; a typical four-stroke ground flash, about 9.5 × 10⁸ J. The first return stroke dissipates about 7 × 10⁴ J per metre of channel. The limit: model estimates, not calorimetry of real flashes, and they depend on the assumed charge densities.

Read the paper
A lightning bolt striking the ground in open countryside at night
The visible channel is a few centimetres wide and kilometres long. Almost all of a flash's energy is spent heating that column of air.Photo: Filip.vidinovski, CC BY-SA 4.0, via Wikimedia Commons

How much of that energy can get into a pot?

Only the share dissipated by the pot's own electrical resistance, which for a median first stroke through a clay handi is about 0.2 MJ, around 0.04% of the stroke's energy.

Inside the food, lightning heats exactly like a stove's heating coil: by Joule heating, where power is \(I^2R\). The energy a current pulse deposits in a resistance \(R\) is that resistance times the pulse's action integral, also called specific energy:

\[ E = R \int i^2\,dt \]
  1. The stroke's action integral. Model the median first stroke as a fast rise and exponential decay with peak \(I\) = 30 kA and half-value time 75 µs, so the decay constant is \( \tau = 75/\ln 2 \approx 108\ \mu\text{s} \):
    \[ \int i^2\,dt \approx \frac{I^2 \tau}{2} = \frac{(3\times10^4)^2 \times 1.08\times10^{-4}}{2} \approx 4.9\times10^{4}\ \text{A}^2\text{s} \]
  2. The biryani's resistance. Take a clay handi 30 cm across with a 15 cm deep layer of biryani, current entering the top and leaving the base. Food conductivity varies widely: Varghese and colleagues list chicken at 0.37 to 0.8 S/m and soups at 1.4 to 1.8 S/m; I assume 0.5 S/m for moist, salted rice and meat:
    \[ R = \frac{L}{\sigma A} = \frac{0.15\ \text{m}}{0.5\ \text{S/m} \times \pi (0.15\ \text{m})^2} \approx 4.2\ \Omega \]
  3. Energy in. \( E = 4.2 \times 4.9\times10^4 \approx 2.1\times10^{5}\ \text{J} \).
  4. Temperature rise. The handi holds about 10.6 kg; with an assumed specific heat of 3.5 kJ/kg·K:
    \[ \Delta T = \frac{E}{mc} = \frac{2.1\times10^5}{10.6 \times 3500} \approx 5.6\ \text{K} \]

A median strike warms a big handi of biryani by less than 6 degrees. To take it from 25°C to 100°C needs \( 10.6 \times 3500 \times 75 \approx 2.8\ \text{MJ} \), more than ten times as much.

Technology, applications and modelling of ohmic heating: a reviewVarghese KS, Pandey MC, Radhakrishna K, Bawa AS · Journal of Food Science and Technology 51(10):2304–2317 · 2014 (online 2012)

This review from DFRL Mysore covers ohmic heating, where food is heated by passing an electric current through it. It tabulates conductivities at 25°C, from 2 to 3 S/m for pickles and chutneys and 0.37 to 0.8 S/m for chicken down to 0.06 to 0.1 S/m for vegetable pieces and 0.001 S/m for syrup, and reports heating rates of 1 to 5°C per second for chutneys and 7 to 50°C per second for milk at mains frequency, with industrial energy efficiency above 90%. The limit: commercial ohmic heaters run for seconds to minutes at controlled voltages, nothing like a 100-microsecond, 100 kV pulse.

Read the paper (free)

What if the biryani is in a steel or copper handi?

Then almost nothing reaches the food, because the metal is a path tens of thousands of times easier for the current, and the pot acts like a Faraday cage around the rice.

Current divides between parallel paths in inverse proportion to their resistance. A stainless steel pot wall 2 mm thick, 15 cm tall and 30 cm across, with a resistivity of about 7 × 10⁻⁷ Ω·m (an assumed typical value), has

\[ R_{wall} = \frac{\rho_e L}{A_{wall}} = \frac{7\times10^{-7} \times 0.15}{\pi \times 0.30 \times 0.002} \approx 5.6\times10^{-5}\ \Omega \]

That is about 75,000 times less than the food's 4.2 Ω, so the biryani receives roughly 1/75,000 of the current-squared heating, about 3 J. The pot rim might arc, melt a spot or weld the lid on, but the rice stays as it was.

This is why lightning that hits a car or an aircraft travels through the metal skin and leaves the inside largely unharmed. It is also why tall steel structures survive repeated direct hits.

Clay handi Steel handi biryani current goes through food R ≈ 4.2 Ω → ~0.2 MJ biryani current runs down the wall R ≈ 0.00006 Ω → food gets ~3 J Heat in the food = R × ∫i²dt, so the path with resistance gets the heat
Why the pot material decides everything. In clay, the current must cross the biryani and heats it by about 6°C; in steel, it takes the 75,000-times-easier metal path and the food barely notices. Values from the calculations in this post, using CIGRÉ median stroke data.
Historic photograph of lightning striking the Eiffel Tower in Paris
A historic photograph of lightning striking the Eiffel Tower. A metal handi does the same job on a small scale: the current takes the metal and leaves what is inside alone.Photo: Gabriel Loppé, Public domain, via Wikimedia Commons

Why would the rice still be raw?

Because rice cooks by absorbing water, and that takes 15 to 23 minutes near 100°C, while the strike's heat arrives in a few hundred microseconds and then only a few degrees of it.

Rice cooks by soaking, not by flash

Cooking rice is not just reaching a temperature. Above roughly 70 to 80°C, starch granules swell and gelatinise as water diffuses into the grain; Wariyah and colleagues found water uptake switches to a slower, constant-rate regime once that happens.

Meresa and colleagues measured minimum cooking times of 15 to 23 minutes in boiling water before the white core disappears. Biryani hides this behind technique: the rice is parboiled first, then finished in a sealed pot, the dum, for another 20 minutes or so.

So the question becomes: after the strike, is the pot hot enough, for long enough? With the median stroke it is about 31°C, not even warm. The bolt is roughly ten million times too short to cook rice on its own.

\[ \frac{t_{cook}}{t_{stroke}} \approx \frac{20\ \text{min}}{100\ \mu\text{s}} = \frac{1200\ \text{s}}{10^{-4}\ \text{s}} = 1.2\times10^{7} \]
Lightning time vs rice time (log scale) 1 µs1 ms1 s1 min1 h 5.5 µs rise 75 µs half-value 60 ms between strokes rice: 15–23 min about 10⁷ times apart
Each tick is a factor of a thousand (and sixty, for the last two). Stroke times are CIGRÉ TB 549 medians; the cooking window is Meresa et al. (2020). Positions are approximate on the log axis.
Effect of Parboiling Conditions on Physical and Cooking Quality of Selected Rice VarietiesMeresa A, Demissew A, Yilma S, Tegegne G, Temesgen K · International Journal of Food Science 2020:8810553 · 2020

Three rice varieties were parboiled at soaking temperatures of 40 to 80°C and steaming times of 10 to 50 minutes, then cooked in boiling water and pressed between glass plates until no white core remained. Minimum cooking times were 16 to 23 minutes for two varieties and 15 to 20 minutes for the third, rising with harsher parboiling; mean water uptake ratios were 3.25 to 4.20. The limit: Ethiopian varieties rather than biryani basmati, but the order of magnitude, tens of minutes, is what matters here.

Read the paper (free)

Could a bigger bolt do it?

Yes, in principle. Positive lightning, about 10% of strikes, has a median action integral of 6.5 × 10⁵ A²s, which through the same clay handi deposits about 2.8 MJ: almost exactly enough to bring the biryani to the boil.

  1. Energy. CIGRÉ's median positive stroke: 35 kA, 230 µs impulse duration, \( \int i^2 dt = 6.5\times10^5 \) A²s. \( E = 4.2 \times 6.5\times10^5 \approx 2.76\ \text{MJ} \).
  2. Temperature. \( \Delta T = 2.76\times10^6 / (10.6 \times 3500) \approx 74\ \text{K} \), from 25°C to about 99°C.
  3. Holding it there: the dum. Treat the sealed handi with Newton's law of cooling. With an outer area of about 0.35 m² and \(h\) about 10 W/m²·K (both my estimates), the time constant is
    \[ \tau = \frac{mc}{hA} = \frac{10.6 \times 3500}{10 \times 0.35} \approx 10{,}600\ \text{s} \]
    so after 20 minutes the biryani is still at \( 25 + 74\,e^{-1200/10600} \approx 91^\circ\text{C} \), above the gelatinisation range.
  4. Will the current go through, or around? The peak voltage across the pot is \( IR = 35\ \text{kA} \times 4.2\ \Omega \approx 150\ \text{kV} \) over 15 cm, about 1 MV/m. Dry air breaks down near 3 MV/m, so the current would mostly pass through the food rather than arc around it; a wet pot surface could still flash over. Treat this as marginal.

It would not be gentle

Current crowds into the most conductive paths, the salty gravy and meat juices, so those flash to steam in microseconds while drier rice lags.

Meanwhile the first metre of channel above the pot dumps about 7 × 10⁴ J into the air almost instantly, producing the shock wave we hear as thunder. Expect the lid gone and a good fraction of the biryani on the ceiling.

Energy delivered into a 10.6 kg clay handi of biryani
See the data as a table
Energy (MJ)
Median negative first stroke0.21
Heat needed, 25 to 100°C2.78
Median positive stroke2.76

Source: Calculated from CIGRÉ TB 549 median stroke parameters and food conductivity from Varghese et al. (2014) · Assumes 0.5 S/m food conductivity and a 30 cm wide, 15 cm deep biryani layer. A steel handi would receive about 3 J.

Lightning Parameters for Engineering Applications (CIGRÉ Technical Brochure 549)CIGRÉ Working Group C4.407, led by Rakov VA · 2013 (summary presented by Maytum M, Martin A, 2014)

TB 549 updated the CIGRÉ lightning parameters, last revised in 1980, using measurements gathered since then by a team of about twenty specialists. Median first negative strokes carry 30 kA peak, 5.5 µs front, 75 µs to half value and 5.2 C; subsequent strokes 12 kA and 1.4 C, about 60 ms apart. Median positive strokes carry 35 kA, 16 C, a 230 µs impulse and an action integral of 6.5 × 10⁵ A²s (1.5 × 10⁷ A²s at the 95th percentile), and make up roughly 10% of lightning. The limit: positive-stroke values rest on few, older measurements, which the brochure flags with cautions.

Read the summary (free)

Strike your own handi

What changes if the assumptions move?

ChangeTemperature after the strikeRice cooked?
Steel or copper handi, any strokeUnchanged, about 25°CNo, the metal carries the current
Clay handi, median negative first strokeAbout 31°CNo
Clay handi, all four strokes of a typical flashAbout 33°C (three median subsequent strokes add about 1°C)No
Clay handi, median positive strokeAbout 99°CYes, if sealed for dum and not blown apart
Saltier gravy, 1.5 S/mA third of the riseLower resistance means less \(I^2R\) heating
Smaller handi, 20 cm wide, 10 cm deepAbout 28°C rise, five times the large handi'sSmall pots boil and burst first

The salt result is counter-intuitive: a more conductive biryani heats less, because with a fixed current the deposited energy is \(I^2R\), and salt lowers \(R\).

For lightning cooking, you want your biryani bland.
Verdict: possible with changes

With a typical bolt, no: in a metal pot the food gets about 3 J, and even through a clay handi a median first stroke deposits about 0.2 MJ, a 6°C rise, while rice needs 15 to 23 minutes near 100°C to cook. With changes, yes in principle: a non-conducting clay handi, a low-salt biryani, a rare median positive stroke (about 6.5 × 10⁵ A²s, 2.8 MJ, roughly 10% of lightning) and a sealed, insulated dum to hold about 90°C for 20 minutes. The physics works; the odds of the right stroke hitting your handi, and of the biryani staying in the pot, do not.

A plate of dum biryani with long-grain rice and pieces of meat
The target: dum biryani, finished by trapping steam in a sealed pot for around 20 minutes. A lightning strike delivers its heat in about a ten-thousandth of a second.Photo: Umesh Tongbra, CC BY-SA 3.0, via Wikimedia Commons

Biryani's slow, sealed dum, the opposite of a lightning strike, is traced in the history of biryani in India, and why basmati behaves the way it does in the science of rice from basmati to Sona Masoori. The browning a lightning-cooked biryani would miss is explained in the Maillard reaction in Indian cooking, and how pressure speeds rice up in the pressure cooker's science. More from the Taste Lab is on the Rasa world page.

What if next?

Questions people ask

How much energy is in a lightning bolt?

Model estimates put a single stepped-leader and return-stroke sequence at about 5.5 × 10⁸ J and a typical four-stroke flash at about 9.5 × 10⁸ J. Most of it heats the air along the channel rather than whatever is struck.

How hot is lightning?

The channel can heat air to about 50,000°F, roughly 28,000°C, about five times the temperature of the Sun's surface, according to the US National Weather Service.

Can lightning cook food?

It can heat food that it passes through, by the same Joule heating used in industrial ohmic cookers. But a typical stroke deposits only a fraction of a megajoule in a pot-sized resistance, in under a millisecond, which is far too little and far too fast to cook rice.

Is a metal pot safe from lightning?

A metal pot carries the current around its contents, much as a car body protects the people inside. That protects the food, not you: never stand outdoors with metal objects during a thunderstorm.

Sources

  1. Cooray V: Energy dissipation in lightning flashes, Journal of Geophysical Research (1997) (5.5 × 10⁸ J per stroke sequence, 9.5 × 10⁸ J per flash, 7 × 10⁴ J/m)
  2. Maytum M, Martin A: CIGRÉ TB 549, Lightning Parameters for Engineering Applications, PEG conference summary (2014) (30 kA, 5.5/75 µs, 5.2 C; positive 35 kA, 6.5 × 10⁵ A²s, about 10% of lightning)
  3. Varghese KS et al.: Technology, applications and modelling of ohmic heating: a review, Journal of Food Science and Technology (2014) (food electrical conductivities)
  4. Meresa A et al.: Effect of parboiling conditions on physical and cooking quality of selected rice varieties, International Journal of Food Science (2020) (15–23 min minimum cooking time)
  5. Wariyah C et al.: Kinetics of water absorption in rice, Agritech (2007) (water uptake regime change above gelatinisation)
  6. US National Weather Service: Lightning science overview (channel temperature about 50,000°F)
  7. Wikipedia: Dielectric strength (air about 3 MV/m)
  8. Down To Earth: Lightning remains an understated disaster in India (2025) (Annual Lightning Report 2024-25)
  9. Down To Earth: Over 160 killed by lightning in March–April 2025 (2025)
  10. APS News: This Month in Physics History, December 23, 1750: Ben Franklin attempts to electrocute a turkey (2006) (two jars equal to forty phials, the 1749 electrical barbecue, the flash and crack, numbness and soreness; the story)
lightningbiryaniohmic heatingJoule heatingaction integralFaraday cagedum cookingrice gelatinisation
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of Foodblog.

Keep reading in Foodblog

From the other blogs