If Raja Ravi Varma had a camera and Photoshop, he would mostly have done faster what he was already doing by hand: research published in 2026 shows he built paintings from photographs of posed models, including his own daughter, and reportedly photographed himself in a sari when he could not find a model. The bigger change would have been at his press, where each large print needed about 13 hand-drawn litho stones; four-colour digital separation would cut the press passes per sheet by about three times. His style, the idealised gods that became Indian calendar art, would very likely have stayed the same.
- 1892–93: photographs of his daughter Mahaprabha in two poses survive as references for There Comes Papa (1893).
- 13 stones, one per colour, went into each large Ravi Varma Press lithograph; accounts range from 7 to 30.
- 25.4 megapixels is what a 49.5 × 36.8 cm print needs at 300 ppi, about one frame from a 24 MP mirrorless camera.
- 32 negatives were combined by Oscar Rejlander in 1857 for one photograph. Compositing was already possible in Ravi Varma's youth.
- ₹167.2 crore: what one of his originals, Yashoda and Krishna, sold for at Saffronart in April 2026.
Raja Ravi Varma (1848–1906) is the painter most Indians have seen without knowing his name: his Lakshmi, Saraswati and Shakuntala came off his own press from 1894 at ₹2 to ₹6 a print and became the template for calendar art. The question is fun, but it is also answerable, because we now know a lot about how his studio actually worked. Let me go through it as a production problem: references, composition, colour and printing.
Did Raja Ravi Varma already use photographs?
Yes. In an October 2026 lecture at the Salar Jung Museum, the researcher Ganesh V. Shivaswamy described photographs and glass plate negatives found in a box at Kilimanoor, the artist's family home, which served as references for compositions, poses, costumes and studio props. Ordinary people sat as models; a Goan performer, Rajibai Mulgaonkar, is named as the model for Lakshmi and other works.
In 1892 or 1893, Ravi Varma had his eldest daughter, Mahaprabha, photographed holding her infant son, in at least two different poses. He studied the prints, picked the three-quarter view, and painted There Comes Papa (1893): a mother turning towards a door, the baby pointing. The dog at her feet does not appear in the photographs; he added it on the canvas. When photographers G. Venket Ram and Suhasini Hasan recreated the painting in 2020, they had to add the dog in post-production too. Ravi Varma was, in effect, shooting reference, choosing a frame and compositing a new element, a workflow any Photoshop user would recognise, more than a century before the software existed.
Ganesh Shivaswamy Foundation on Google Arts & Culture: Photograph to PhotographHe even modelled for himself
For Damayanti, according to Shivaswamy's research as reported in October 2026, Ravi Varma had trouble finding a suitable model and dressed in a sari to photograph himself in the pose. Whether or not every detail holds up, it fits the pattern: the camera was his sketchbook, and the painting was the finished, idealised version.

What would a camera have changed in his painting?
Less than you would think, because he had the important part already: a photographic reference that froze a pose. What a modern camera adds is speed and volume, and a digital camera adds instant review.
- Glass plates (his era): each exposure needed a prepared plate, a darkroom and hours before he saw it.
- A modern mirrorless body: hundreds of frames in a session, checked on the screen at once, with the light and pose adjusted live.
- What does not change: the decision of which frame to use, and everything he did on the canvas afterwards, including idealising faces and adding elements.
Worked example: how many pixels does a Ravi Varma print need?
His press used two standard imported litho stones, roughly 49.5 × 36.8 cm and 34.3 × 25.4 cm, according to Vidya Dehejia's 2022 study. Print shops work at about 300 pixels per inch for close viewing, so the pixel count needed is:
A 24-megapixel APS-C camera, such as the Sony ZV-E10 I use for deliberate shots, records 6,000 × 4,000 pixels. Spread over the large stone, that is about 308 ppi on the long side and 276 ppi on the short side. One frame from an entry-level camera would carry enough detail for his biggest print. The smaller stone needs only 12.2 MP.

What would Photoshop have changed?
Compositing, mostly, and it would have been a speed-up rather than a new idea. In 1856–57, Oscar Rejlander combined 32 negatives into one photograph in about six weeks. Ravi Varma's own studio did something similar on canvas and stone: the Ravi Varma Press issued Lakshmi Saraswati Sanyog, which merges two separately published goddess images into a single print.
With layers, masks and adjustment curves, a composite that took Rejlander weeks is an afternoon. That makes the honest answer slightly uncomfortable: Ravi Varma would probably have made more composites, and they would have been harder to tell from photographs.

Would people be able to spot his composites?
Forensic scientists would, at least some of them. Image forensics rests on the idea that a composite can look perfect yet break the physics or statistics of a real photograph.
Farid sorts the tools for catching doctored images into five families: pixel-based (statistical traces of resampling or cloning), format-based (for example, the periodic histogram artefacts left when a JPEG is compressed twice), camera-based (breaks in the colour filter array interpolation pattern every sensor leaves), physics-based (inconsistent lighting direction between pasted elements and the scene) and geometric (impossible perspective or positions). The survey explains the maths behind each, such as how double quantisation leaves empty or doubled histogram bins. The limit: it is a 2009 review; generative AI has since created new kinds of fakes that need new detectors.
Read the paper (free)The physics-based test is the interesting one for a painter. A model photographed under a studio window and a background shot outdoors carry different light directions, which a forensic analyst can measure. Ravi Varma painted his light by hand, so he could make it consistent; a quick Photoshop composite often does not.
How would digital printing have changed his press?
This is where the numbers move most. An oleograph is a chromolithograph varnished to look like an oil painting. Each colour was hand-drawn on its own limestone slab and printed in sequence on the same sheet. Dehejia records that large Ravi Varma Press prints used thirteen colours, thirteen runs through the press, and Nanditha Krishna's history puts the range at 7 to 30 stones.
An art-historical study tracing how compositions from the Ravi Varma Press were copied onto Indian silverware, line for line. Along the way it documents the press's production: lithograph sizes were set by two standard imported stones, about 49.5 × 36.8 cm and 34.3 × 25.4 cm, and large lithographs used thirteen colours, so each print needed thirteen successive press runs from thirteen stones. It also argues that the way Lakshmi's pink sari is draped in the print matched no regional tradition of the time, became fashionable because of the print, and is now the standard drape. The limit: it is a study of the prints' influence, not a production record, so it gives no output figures.
Read the paper (free)Worked example: press time for a print run
Press time is copies times passes, divided by impressions per hour. I could not find a verified speed for his imported machines, so I assume 800 impressions an hour and test the range; treat it as my estimate.
- Variables. Copies \( N = 5{,}000 \), stones \( S = 13 \), press rate \( R = 800 \) impressions per hour.
- Oleograph. \( T = N S / R = 5{,}000 \times 13 / 800 \approx 81 \) press hours.
- CMYK. \( T = 5{,}000 \times 4 / 800 = 25 \) press hours, a factor of \( 13/4 = 3.25 \).
- Sensitivity. At 400 impressions an hour the oleograph run takes about 163 hours; at 1,200 about 54. The ratio to CMYK stays 3.25 whatever the speed.
Calculated in this post from the 13 stones in Dehejia (2022) and assumed press rates of 400 and 1,200 impressions an hour, with these example inputs (5,000 copies).
And that ignores the bigger saving: a skilled artist no longer redraws the picture 13 times on stone. Separations come out of one master file in minutes.
But would the colour be as good?
Not quite, and here the Neugebauer model of print colour explains why. In halftone printing, every visible colour is a mix of the "primaries" formed where inks overlap: 8 for cyan, magenta and yellow, and 16 for CMYK. Thirteen independent inks could in principle overprint in \( 2^{13} = 8{,}192 \) combinations, and, more practically, each stone could carry a dense, mixed spot colour that CMYK can only approximate.
That is why the saturated reds and greens of an oleograph, or a modern brand's spot colour, can fall outside a CMYK gamut. I go into the trade-off in RGB vs CMYK and whether Pantone spot colours are worth it. A modern Ravi Varma would probably print CMYK for the cheap edition and add one or two spot inks, a gold or a deep red, for the premium one.
Use this to check what you just read: set a print size and a run, and compare stone-by-stone printing with four-colour separation.
Ravi Varma print run: stones vs CMYK
Would modern tools have changed his style?
Probably not much, and the evidence is in what he chose to do with the photographs he had. He used them for pose and costume, then idealised faces, smoothed skin and set gods in theatrical light. That is a choice of style, not a limit of tools.
| Stage | His method (1870s–1900s) | With camera and Photoshop | What changes |
|---|---|---|---|
| Reference | Glass plate photos of posed models | Digital shoot, instant review | Hours to seconds per frame |
| Composition | Choose frame, add elements on canvas | Layers and masks | Faster, more composites |
| Finish | Oil on canvas, idealised | Paint-over or digital painting | Little: the style is his choice |
| Separation | Artisans redraw 7–30 stones | CMYK from one master file | Days of drawing to minutes |
| Printing | 13 passes per sheet | 4 impressions per sheet | About 3.25x fewer passes |
| Distribution | Printed copies sold through dealers | Print plus digital files | Copying becomes even easier |
The camera was his sketchbook and the canvas was his edit. Photoshop would have merged the two, not replaced the eye that chose the frame.From this post
The copying problem would get worse
Rival presses copied his compositions within years, and the copying never stopped: it became calendar art. With digital files, a copy is perfect and instant. The economics that made his originals worth ₹167.2 crore in 2026 while his prints sold for ₹2 in 1894 would tilt further towards the unique physical original. I cover the auction side in the most expensive Indian paintings.
Ravi Varma did not need Photoshop to work like a photo-compositor: surviving glass plates show he posed models, chose frames and added elements, and the 1857 Rejlander print proves 32-negative composites were possible in his youth. A modern camera would give him a 24 MP frame, enough for his largest 49.5 × 36.8 cm print at about 300 ppi, and digital separation would cut each print from 13 press passes to 4, about 3.25 times faster on the press, while losing some of the oleograph's dense spot colour. His idealised style was a choice, so it would most likely have survived the new tools.
What does this mean for designers using AI now?
The same thing it meant for him. New tools changed the speed of reference, composition and reproduction, but the decisions that made his images last, which pose, which light, which ideal, stayed human.
- Treat the tool as a sketchbook. Generate or shoot many options, then choose and finish deliberately; my notes on designing with AI make the same point.
- Keep a master file. His litho stones were masters that printed one consistent Lakshmi for decades, as the story of his press shows.
- Expect a backlash. The Bengal School called his prints kitsch, as told in the Bengal School's history. Every efficient new medium meets one.
For more on how I work across design and photography, see the Kala world page.

What's new
- Glass plate negatives from Kilimanoor show how Ravi Varma used photographs and models Deccan Chronicle, Oct 2026
- Yashoda and Krishna sells for $17.9 million, a record for an Indian painting The Art Newspaper, Apr 2026
- The Ganesh Shivaswamy Foundation traces Ravi Varma paintings back to their 1890s reference photographs Google Arts & Culture, latest update
What if next?
- What if you took photos on Mars? Ravi Varma idealised colour by hand; NASA's rovers fight to get it exactly right with a calibration target.
- What if humans could see ultraviolet and infrared? His palette, and every print, is built for three cones. Add a fourth and it all looks different.
- What if every camera on Earth vanished? Painters would get his old job back, recording likeness by hand.
Questions people ask
Did Raja Ravi Varma use photographs?
Yes. Glass plate negatives found at Kilimanoor and photographs of his daughter Mahaprabha show he used photos as references for poses, costumes and compositions, then idealised the result in paint.
What is an oleograph?
A chromolithograph printed from many stones, one per colour, then varnished or textured to look like an oil painting. Large Ravi Varma Press prints used thirteen colours.
Who modelled for Ravi Varma's goddesses?
Ordinary people and family members. Research reported in 2026 names Rajibai Mulgaonkar, a performer from Goa, as a model for Lakshmi and other works.
Was photo compositing possible in the 1800s?
Yes. Oscar Rejlander made The Two Ways of Life in 1856–57 by combining 32 negatives into one print over about six weeks.
Sources
- Ganesh Shivaswamy Foundation, Google Arts & Culture: Photograph to Photograph (There Comes Papa reference photos, two poses, the added dog)
- Deccan Chronicle: Raja Ravi Varma's studio secrets shed light on his artistic process (2026) (Kilimanoor glass plates, Damayanti self-portrait, Rajibai Mulgaonkar)
- Dehejia, The Burlington Magazine: Imagery by Raja Ravi Varma on Raj Silver (2022) (13 colours, stone sizes, sari drape)
- Farid, IEEE Signal Processing Magazine: Image forgery detection (2009) (five families of forensic tests)
- Nanditha Krishna, Open: Raja Ravi Varma, when the gods came home (7 to 30 stones, ₹6 and ₹2 prices)
- Wikipedia: Oscar Rejlander (32 negatives, six weeks, Queen Victoria)
- Wikipedia: Neugebauer equations (8 and 16 primaries)
- Wikipedia: Sony ZV-E10 (6,000 × 4,000 pixel sensor)
- The Art Newspaper: Yashoda and Krishna sets a record for Indian painting (2026)
- Vishwanathan, CLCWeb: Aesthetics, nationalism, and the image of woman in modern Indian art (2010) (the press and nationalist visual culture)
- Wikimedia Commons: Lakshmi Saraswati Sanyog, Ravi Varma Press (combined print)
