Electric scooter battery: LFP vs NMC and how long it lasts

The chemistry inside the pack decides how far the scooter goes, how heavy it is, how it fails in a fire and how many years it lasts. Here are the lab numbers behind the warranty cards.

An Ola S1 Pro electric scooter parked on a street, seen from the side
Photo: Ganesh Mohan T, CC BY-SA 4.0, via Wikimedia Commons

Electric scooter battery life depends mostly on cell chemistry, heat and how deeply you cycle the pack. In Sandia National Laboratories' three-year test of commercial cells, lithium iron phosphate (LFP) cells were on course for 2,500 to 9,000 full cycles before falling to 80% capacity, while nickel manganese cobalt (NMC) cells lasted 200 to 2,500. NMC packs carry more energy per kilo, which is why most Indian scooters still use them, and why the standard 3-year warranty is about the chemistry's limits as much as the maker's confidence.

Key takeaways
  • In Sandia's test, LFP cells were on course for 2,500–9,000 cycles to 80%; NMC managed 200–2,500.
  • In thermal runaway, an LFP 18650 peaked at 259 °C; an NMC cell hit 731 °C, heating 2,500 times faster.
  • Charging 30% to 80% nightly lasts far longer than running flat and filling to 100%.
  • A 3.5 kWh pack at 40 km a day does only about 125 full cycles a year; calendar ageing usually ends it.
  • AIS-156, written after the 2022 fires, demands a pack that survives one cell in runaway.
  • Ather's warranty replaces a pack below 70% health within its term.

Every Indian e-scooter spec sheet leads with kWh and certified range. Neither number tells you how the pack ages, what happens if a cell shorts, or why Ather now puts LFP cells in some Rizta scooters and NMC in every 450.

This post works through the cell, the pack, the battery management system (BMS) and the test rules India wrote after the 2022 scooter fires, using lab data rather than brochure claims. I worked as a junior mechanical engineer at Apeiron Mobility, manufacturing battery packs and small scooter units, so the pack is familiar hardware to me, but every number below comes from a source you can open.

2,500-9,000LFP full cycles to 80% in Sandia's test (mostly extrapolated)
200-2,500NMC full cycles to 80% in the same test
259 °C vs 731 °Cpeak temperature in thermal runaway, LFP vs NMC 18650 cells (KIT, 2017)
70%state of health below which Ather replaces the pack under warranty

What is inside an electric scooter battery pack?

An electric scooter battery is a pack of a few hundred cylindrical or prismatic lithium-ion cells wired in series and parallel, plus:

  • a BMS that watches every series group;
  • a fuse and a contactor;
  • a sealed metal or composite enclosure.

A typical Indian scooter runs a nominal 48 V to 72 V system. The cells set the chemistry; the pack design decides how well they survive Indian heat, water and vibration.

The story

On 26 March 2022, a blue Ola S1 parked at a roadside in Pune began pouring thick white smoke from under its bodywork, then burst into flames. Autocar India reported that it did not appear to be plugged in, and that the smoke pointed to thermal runaway in the lithium-ion pack. Ola said it was investigating and that the owner was safe.

It was not the first e-scooter fire that season, and in April 2022 Ola recalled 1,441 scooters as a pre-emptive measure. In May 2022 the Ministry of Road Transport and Highways set up an expert committee with members from ARCI, IISc and the IITs. Its work became the AIS-156 amendments described later in this post: the reason every Indian scooter pack sold today has to keep one failing cell from setting fire to the rest.

Autocar India: Ola S1 electric scooter catches fire (Mar 2022)

The common cell sizes are named by their dimensions. An 18650 is 18 mm across and 65 mm long; a 21700 is 21 mm by 70 mm; Ola's in-house 4680 cell is about 46 mm by 80 mm. Bigger cells mean fewer welds and sensors per kWh, but more energy released if one fails. Each cell's chemistry is named after its cathode:

  • NMC (lithium nickel manganese cobalt oxide): a layered oxide cathode, about 3.6-3.7 V nominal per cell, high energy density.
  • LFP (lithium iron phosphate): an olivine cathode, about 3.2 V nominal, lower energy density, much more stable structure.
  • NCA (nickel cobalt aluminium): another layered oxide, close to NMC in behaviour and common in older laptop and EV cells.
Two cylindrical lithium-ion cells side by side, an 18650 and a slightly larger 21700
An 18650 cell and a 21700 cell. Scooter packs are built from hundreds of cells like these, grouped in series to reach 48-72 V.Photo: Sevenethics, CC0, via Wikimedia Commons
Sealed pack (IP67 enclosure)group 1group 2 ...group nCells in parallel inside a group, groups in seriesBMS: voltage of every group, 4+ temperaturesensors, current, balancing, cut-offfuse +contactormotorcontrollerThe weakest series group sets the usable capacity of the whole pack.
How a scooter pack is organised. Because groups are in series, one weak or hot group limits range and triggers the BMS for the whole pack.

LFP vs NMC: which battery chemistry lasts longer?

LFP lasts longer. The cleanest public comparison is Preger and colleagues at Sandia National Laboratories, who cycled commercial LFP, NMC and NCA 18650 cells for almost three years across three temperatures, three depth-of-discharge windows and several discharge rates, stopping each test at 80% of starting capacity.

Cell in the Sandia testChemistryCapacityFull cycles to 80% capacityBehaviour
A123 APR18650M1ALFP1.1 Ah2,500 to 9,000 (most extrapolated)Fade rises with heat; least sensitive to full 0-100% cycling
LG Chem 18650HG2NMC3.0 Ah200 to 2,500Fade fell between 15 and 35 °C; lost 5-10% more than LFP at 0-100%
Panasonic NCR18650BNCA3.2 Ah250 to 1,500Little temperature dependence in this range

Two caveats from the same paper matter for buyers:

  1. The spread inside one chemistry was huge: the same NMC cell lasted 200 cycles under one condition and 2,500 under another, all within the manufacturer's limits.
  2. Energy throughput narrows the gap: when the authors counted total energy delivered instead of cycles, the difference shrank, because each LFP cycle carries less energy. An LFP pack must be bigger and heavier to give the same range, so it does fewer full cycles over the same kilometres.

How does depth of discharge change battery life?

Shallow cycles last far longer than deep ones, and LFP benefits more. Battery University's BU-808 table, compiled from industry data, shows cycles to 70% capacity rising from about 300 at 100% depth of discharge to about 2,000 at 20% for NMC, and from about 600 to 9,000 for LFP.

Cycle life vs depth of discharge (cycles to 70% capacity)
See the data as a table
NMC (cycles)LFP (cycles)
100% DoD300600
80% DoD400900
60% DoD6001500
40% DoD10003000
20% DoD20009000
10% DoD600015000

Source: Battery University, BU-808 · Approximate industry figures; real cells vary with temperature and charge rate.

Cycles are not the whole story. Note the units: 9,000 cycles at 20% depth deliver the same energy as 1,800 full cycles. Even so, the curve explains why a scooter charged from 30% to 80% every night outlives one that is run flat and charged to 100%.

The same page shows how heat and full charge age a cobalt-based cell even when parked, a year in storage:

Storage for a yearAt 40% chargeAt 100% charge
25 °Cabout 96% capacity leftabout 80%
40 °Cabout 85%about 65%

A scooter parked in a Bengaluru basement at full charge ages more slowly than one baking in a Rajasthan courtyard, whatever the odometer says.

Is an LFP scooter battery safer than NMC in a fire?

Yes, measurably. When a lithium-ion cell overheats past a threshold, its own reactions release heat faster than it can escape; this is thermal runaway. NMC's layered oxide cathode releases oxygen as it breaks down, which feeds the fire from inside. LFP's phosphate structure holds its oxygen much more tightly.

Lei and colleagues at the Karlsruhe Institute of Technology heated fully charged commercial 18650 cells with LFP, NMC and LMO cathodes in an accelerating rate calorimeter and recorded what happened:

18650 cell, 100% chargeSelf-heating onsetPeak temperaturePeak heating rateReaction heat
LFP (LiFePO4)90 °C259 °C3 °C/min184 J/g
LMO (LiMn2O4)91 °C581 °C1,285 °C/min391 J/g
NMC (Ni 0.33, Mn 0.33, Co 0.33)91 °C731 °C7,577 °C/min597 J/g

All three started self-heating at about 90 °C, so LFP is not immune. The difference is what follows: the NMC cell's temperature climbed thousands of times faster and peaked almost 500 °C higher.

Part of that gap is energy, since the NMC cell held about twice the capacity of the LFP cell, but the reaction heat per gram is also three times higher. In a pack, that rate decides whether one failed cell stays a smoking cell or ignites its neighbours.

The rate decides whether one failed cell stays a smoking cell or ignites its neighbours.
Thermal runaway in 18650 cells, 100% charge (KIT, 2017)dashed line: self-heating starts at about 90 °C259 °C581 °C731 °CLFPLMONMC3 °C/min1,285 °C/min7,577 °C/min
Peak temperature and peak heating rate for each cathode in the KIT calorimeter. All three start at about 90 °C; what differs is how hot and how fast.

Gas matters too. Researchers at the US National Institute for Occupational Safety and Health measured an NMC 18650 cell in runaway inside a sealed box with 92.5 mL of free space reaching 232 bar, far higher than earlier LFP results under similar confinement. For a scooter, a sealed IP67 pack is exactly such a box, which is why Indian rules now ask for pressure vents.

An Ola S1 Pro electric scooter seen from the front three-quarter angle
The Ola S1 Pro. Ola now builds its own 4680-format cells for the S1 Pro+ 5.2 kWh pack, approved by ARAI under the AIS-156 rules.Photo: Ganesh Mohan T, CC BY-SA 4.0, via Wikimedia Commons

Which Indian scooters use LFP and which use NMC?

Most mainstream Indian scooters use NMC, and makers rarely print chemistry on the spec sheet. Ather is the clearest case: in July 2026 it began fitting LFP cells to the smaller Rizta pack while keeping NMC for the 450, because the 450's stronger motor needs the denser cells.

Scooter (2025-26)PackChemistry (as published)Certified rangeStandard battery warranty
Ather Rizta2.7 kWhLFP123 km3 yr / 30,000 km; extendable to 8 yr / 80,000 km
Ather Rizta2.9 kWhNMC123 kmAs above
Ather Rizta / 4503.5 kWhNMC161 kmAs above
TVS iQube2.2 kWhNot stated by TVS94 km3 yr / 30,000 km
TVS iQube3.5 kWhNot stated by TVS145 km3 yr / 50,000 km
TVS iQube ST5.3 kWhNot stated by TVS212 km3 yr / 50,000 km
Bajaj Chetak 35 series3.5 kWhNot stated by BajajSee Bajaj3 yr / 50,000 km
Ola S1 Pro+5.2 kWhOla 4680 cell (in-house)320 km (IDC, DIY mode)Varies by purchase date; 8 yr options

Where chemistry is "not stated", third-party sites contradict each other, so I have left it blank rather than guess. The Ather numbers are the most revealing: the LFP Rizta needs only 0.2 kWh less to match the NMC pack's certified range, which suggests the LFP version is tuned to reach the same 123 km on the IDC cycle with less energy buffer.

How long does an electric scooter battery actually last in years?

A well-kept NMC scooter pack typically outlasts its 3-year warranty, and the warranty threshold tells you what the maker expects. Ather's Eight70 plan promises a free replacement if state of health drops below 70% within 8 years or 80,000 km. TVS and Bajaj offer 3 years with 30,000 to 50,000 km. A pack is usually considered worn out at 70-80% of original capacity, when range has fallen by a quarter.

The useful way to think about it is energy throughput. A pack rated for, say, 1,000 full cycles at 3.5 kWh delivers about 3,500 kWh over its life. At a real-world 30 Wh per km, that is roughly 1.17 lakh km. Plug your own numbers in:

How long will your scooter battery last?

For most city riders the answer is that calendar ageing, not cycling, ends the pack. At 40 km a day a 3.5 kWh pack does only about 125 full cycles a year, so even 800 cycles is six years of riding. Heat and time at full charge decide whether it gets there.

What does AIS-156 require of an Indian scooter battery?

AIS-156 Amendment 3 is the Indian battery safety standard rewritten after the 2022 e-scooter fires. The Ministry of Road Transport and Highways set up an expert committee in May 2022, with members from ARCI, IISc and the IITs, and the new rules arrived in two phases.

RequirementPhaseWhat it prevents
Traceability of cells, packs, BMS and chargersPhase 1, from 1 Dec 2022Untraceable bad cell batches
Extra fuse at pack levelPhase 1Short circuits feeding a fire
Spacing between cellsPhase 1Heat jumping cell to cell
Smart BMS: over-current, over-charge, over-discharge, short-circuit and over-temperature protectionPhase 1Electrical abuse
Thermal propagation test: one cell in runaway must not cause fire or explosionPhase 2, from 31 Mar 2023A single failure spreading through the pack
Audio-visual warning on a thermal eventPhase 2Rider not knowing until smoke appears
At least four temperature sensors in the BMSPhase 2Hot spots going unseen
Cell testing to IS 16893 at an NABL labPhase 2Weak imported cells
Earth-leakage detection in the chargerPhase 2Shock and charger faults
IPX7 water protection and a pressure ventIn the amendmentWater ingress, pressure build-up in runaway

The thermal propagation test is the one that ties back to chemistry. An LFP pack, whose cells peak at a few hundred degrees and heat slowly, passes it with less shielding and spacing. An NMC pack needs more engineering: mica sheets, wider gaps, vents and careful busbar design. That extra material eats into NMC's weight advantage at pack level.

An electric vehicle charging point mounted outside a building
A public charging point. Fast charging raises cell temperature, which Sandia's data shows speeds up LFP ageing in particular.Photo: Asimverse, CC BY-SA 4.0, via Wikimedia Commons

Should you choose an LFP or NMC electric scooter?

Choose on how you ride, not on chemistry alone. LFP suits short daily commutes, hot cities and riders who keep a scooter for eight years or more; NMC suits riders who need range or performance from a light pack. The table sums up the trade.

FactorLFPNMC
Energy per kiloLower, so a heavier pack for the same rangeHigher
Cycle life (Sandia)2,500-9,000 cycles200-2,500 cycles
Thermal runaway (KIT)259 °C peak, slow731 °C peak, violent
Round-trip efficiencyHigher in every Sandia conditionLower
Heat sensitivityAges faster when hotAges faster when cool, in Sandia's 15-35 °C range
State-of-charge readingFlat voltage curve makes the % gauge harder to calibrateEasier

For context on how the brands compare on range, see electric scooters ranked by certified range. The business side of these packs is its own story: Ola Electric's rise and fall and how Ather built its scooter. For the 12 V battery in a petrol bike, read the motorcycle battery care guide, and for why electric motorcycles trail scooters, this analysis. More engineering from the Yantra world is on the Motoverse page.

Research behind this post

Degradation of Commercial Lithium-Ion Cells as a Function of Chemistry and Cycling ConditionsYuliya Preger et al. · Journal of The Electrochemical Society · 2020

Sandia cycled commercial LFP (A123, 1.1 Ah), NMC (LG HG2, 3 Ah) and NCA (Panasonic, 3.2 Ah) 18650 cells for nearly three years at 15, 25 and 35 °C, at three depth-of-discharge windows and at 0.5C to 3C. LFP was on course for 2,500-9,000 full cycles to 80%, NMC 200-2,500 and NCA 250-1,500. The limit: most LFP figures are extrapolated because the cells had not yet reached 80%, and on an energy-throughput basis the gap shrinks.

Read the paper (free)
Experimental Analysis of Thermal Runaway in 18650 Cylindrical Li-Ion Cells Using an Accelerating Rate CalorimeterBoxia Lei et al. · Batteries (MDPI) · 2017

Karlsruhe Institute of Technology heated fully charged LFP, NMC and LMO 18650 cells in an accelerating rate calorimeter and measured temperature and internal pressure. All began self-heating at 90-91 °C, but peak temperature was 259 °C for LFP versus 731 °C for NMC, and peak heating rate 3 versus 7,577 °C per minute. The limit: one cell model per chemistry, and the NMC cell held about twice the energy of the LFP cell.

Read the paper (free)
Comparison of thermal runaway pressures within sealed enclosures for nickel manganese cobalt and iron phosphate cathode lithium-ion cellsThomas Dubaniewicz et al. (NIOSH) · Journal of Loss Prevention in the Process Industries · 2022

NIOSH measured pressure from NMC 18650 cells in thermal runaway inside sealed enclosures of varying free volume. One cell in 92.5 mL of free space produced 232 bar, and pressures were significantly higher than earlier LFP results under similar confinement. The limit: the work targets mining enclosures, not vehicle packs, but the physics of a sealed box is the same.

Read the paper (free)

Questions people ask

What happens when an Ather battery falls below 70% health?

Under Ather's warranty terms, if the battery's state of health drops below 70% within the covered period (3 years standard, or 5 or 8 years with paid plans), Ather replaces it free. Physical damage and normal wear outside those terms are excluded, so read the terms for your variant.

How much does an electric scooter battery replacement cost in India?

Out of warranty, a full Ather 450X pack replacement has been reported at roughly ₹50,000 to ₹95,000 depending on pack size and generation, according to the independent service network ev.care. Module or cell-group repair, where possible, costs less, but needs a proper BMS diagnosis first.

Is it bad to charge an electric scooter to 100% every day?

It shortens life, especially in heat. Battery University's storage data shows a cobalt-based cell at 25 °C losing about 20% capacity in a year at full charge versus 4% at 40% charge. Daily charging to 80-90% and topping up to 100% only before long rides is a better habit.

Why does my LFP scooter's battery percentage jump around?

LFP cells have a very flat voltage curve between about 20% and 90% charge, so the BMS cannot read state of charge from voltage alone and relies on counting current. Periodic full charges let it recalibrate, which is why some LFP makers recommend one full charge a week.

Can an LFP battery catch fire?

Yes, but less violently. In KIT's tests the LFP cell still self-heated from about 90 °C; it simply peaked at 259 °C rather than 731 °C and heated thousands of times more slowly than NMC. Damage, water ingress and bad charging can still cause failures in any chemistry.

Sources

  1. Preger et al., J. Electrochem. Soc.: Degradation of commercial lithium-ion cells as a function of chemistry and cycling conditions (2020)
  2. Lei et al., Batteries: Experimental analysis of thermal runaway in 18650 cylindrical Li-ion cells using an accelerating rate calorimeter (2017)
  3. Dubaniewicz et al., J. Loss Prev. Process Ind.: Thermal runaway pressures for NMC and LFP cells in sealed enclosures (2022)
  4. Battery University: BU-808, How to prolong lithium-based batteries
  5. EVreporter: AIS-156 additional safety requirements, phases and dates (2022-23)
  6. Autocar India: Ather scooters get new battery packs, LFP cells on Rizta (2026)
  7. Ather Energy: Battery warranty and Eight70 FAQ
  8. TVS Motor: iQube FAQ, battery warranty by pack size
  9. Autocar Professional: Ola Electric begins deliveries of 4680 Bharat Cell vehicles (2025)
  10. Ola Electric community forum: battery warranty announcements (2024)
  11. Autocar India: Ola S1 electric scooter catches fire (2022) (source for the Pune fire on 26 March 2022)
  12. Wikipedia: Ola Electric (source for the April 2022 recall of 1,441 scooters)
  13. ev.care: Ather 450X battery problems, repair and cost
LFPNMClithium-ion batteryAIS-156battery warrantyAther RiztaOla S1thermal runaway
Sapta

Sapta (Saptarshi Sarkar) is a mechanical engineer turned marketer in Bengaluru and a solo touring rider. He writes the seven Saptaverse blogs. Work with him or read more of RoadHook Machines.

Keep reading in RoadHook Machines

From the other blogs